AF164-FR-0710K2L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, arrays, and the AF164-FR-0710K2L are commonly used electronic components in circuit board design. The AF164-FR-0710K2L is a chip resistor network which can be used in a variety of applications from controlling current to providing chip circuitry control.

Resistor networks generally consist of several discrete resistors connected in either series, parallel, or a combination of both. These networks are therefore used to match electrical impedances in the circuit, arbitrary scaling of a signal, or voltage division.

The AF164-FR-0710K2L has two sets of four resistors each. The first set consists of two 1 kΩ and two 10 kΩ resistors, while the second set consists of two 2 kΩ and two 100 kΩ resistors. Together, these resistors form a ladder network that can be used in various configurations for controlling current or voltage.

The working principle behind resistor networks is based on Ohm\'s law. The basic concept is that the voltage divided across each component in parallel will be the same as the applied voltage, while the current through each will be in inverse proportion to the impedance. The AF164-FR-0710K2L, for example, can be used as a voltage divider, a current-limiting device, or anything in between depending on the specific wiring configuration.

Resistor networks, such as the AF164-FR-0710K2L, have many applications. They can be used for controlling current, providing logic circuitry controls, and for many other options. For example, they can be used for voltage matching in audio systems and motor control circuitry, for temperature sensing and temperature compensation, and as an electromechanical transducer.

The AF164-FR-0710K2L can also be used as a simple device for controlling the current in a circuit. When used in this way, it acts as an in-line current limiter. The resistor network is configured so that if the current exceed a certain rate, the voltage across it will start to drop. This drop in voltage causes the current to decrease until it reaches a safe level for the circuit.

Moreover, resistor networks can be used for protecting other circuit components from damage, for instance by preventing the buildup of static electricity. The resistor network is configured so that any buildup of static charge is quickly discharged through the resistors. This prevents the buildup of a low-impedance path that otherwise can cause damage to the components.

The AF164-FR-0710K2L resistor network is a popular component for circuit board design due to its versatility and wide range of applications. With its 4 resistor ladder configuration, it can be used in any number of ways to control current or provide logic control. This makes it a great choice for any application where precision control is required.

The specific data is subject to PDF, and the above content is for reference