AFS14A26-915.00-T2 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are commonly used in a variety of applications from automotive electronics to cell phone communication systems and pose as various advantages such as high stability, sturdy construction and low power consumption. AFS14A26-915.00-T2 is one of such series of SAW Filters, each of which offers piece-to-piece repeatability and stability. In this article, the applications and working principles of the AFS14A26-915.00-T2 will be discussed in brief.

The AFS14A26-915.00-T2 is a high-performance ceramic SAW filter with a center frequency of 915MHz and 50 ohm impedance. It is suitable for a wide range of applications including wireless communications, Bluetooth applications, High Definition Terrestrial Broadcasts, automotive navigation systems, broadcast handsets, and satellite communication terminal equipments. It has excellent performance parameters, providing 8896 dB of loss and excellent harmonic attenuation. It is also designed to work in very noisy environments and to withstand temperatures from -40 to +85°C. The filter is also resistant to shock vibration, meeting the requirements of IEC60068-2-6.

The working principle of AFS14A26-915.00-T2 is based on its transmission line topology design, which allows for an extremely accurate operation. Basically, the device works by allowing only a single frequency signal to pass through it, such that all other signals are filtered out due to their inefficiency. This is accomplished by use of special integrated resonators, which are responsible for filtering the unwanted frequencies. The resonators are made out of Nickel-Zinc (NiZn) ferrite and operate at high frequencies to allow for improved signal filtering capabilities. The use of NiZn ferrite also helps to reduce energy consumption, which in turn helps to reduce the cost of operation.

The AFS14A26-915.00-T2 is designed with a high degree of stability, with tests indicating the use of less than 0.1dB of total harmonic distortion over the operating temperature range. The filter also operates over the 915MHz band with a 3dB bandwidth of 50MHz, which helps to provide improved signal-to-noise ratio and improved signal clarity. It is also designed with robust mechanical topology, allowing for robust operation in dynamic electrical environments.

In conclusion, the AFS14A26-915.00-T2 is a high-performance and highly reliable ceramic SAW filter that is suitable for use in a variety of applications. It offers excellent performance parameters such as 8896dB of loss and excellent harmonic attenuation, excellent stability and robust mechanical topology, and low power consumption. With its ability to filter single frequency signals efficiently, the AFS14A26-915.00-T2 will surely prove to be an indispensable component in any wireless communication or satellite communication system.

The specific data is subject to PDF, and the above content is for reference