Allicdata Part #: | AGF600-48S28-6L-ND |
Manufacturer Part#: |
AGF600-48S28-6L |
Price: | $ 75.95 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Artesyn Embedded Technologies |
Short Description: | DC DC CONVERTER 28V 600W |
More Detail: | Isolated Module DC DC Converter 1 Output 28V 21... |
DataSheet: | AGF600-48S28-6L Datasheet/PDF |
Quantity: | 1000 |
120 +: | $ 69.04300 |
Current - Output (Max): | 21.5A |
Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
Package / Case: | 14-DIP Module, Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 94% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP, UVLO |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 1.5kV |
Power (Watts): | 600W |
Series: | AGF600 |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 28V |
Voltage - Input (Max): | 75V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters play an important role in modern electrical engineering by providing a voltage boost, allowing higher voltage sources to be used in low voltage applications and providing power for DC motors. One of the most commonly used converters is the AGF600-48S28-6L DC DC Converter, which is widely used in the automotive, industrial and medical industries. This article will discuss the application field and working principle of the AGF600-48S28-6L DC DC Converter.
The AGF600-48S28-6L is a three-phase, six-wire DC DC Converter designed to provide electrical power to devices that require higher voltages than those supplied by conventional batteries. The converter operates in a true three-phase configuration, meaning that each phase must be energized separately. The incoming DC voltage can range from 12 volts to 800 volts, and the output voltage can be adjusted between 18 and 312 volts. The converter is capable of providing up to 600 amps of continuous power, making it well suited for high power applications.
The AGF600-48S28-6L is an ideal choice for automotive, industrial, and medical applications, as it offers power with greater efficiency, reliability, and cost-effectiveness than conventional batteries. Automotive applications include automotive control systems, electric vehicles, and hybrid vehicles. Industrial applications include industrial automation systems, robotics, and manufacturing systems. Medical applications include medical devices, hospital equipment, and medical implants.
The AGF600-48S28-6L works by transforming the incoming direct current (DC) electricity from the battery into alternating current (AC). The AC is then inverted back to DC, despite a conversion to a higher voltage. This DC is then filtered and regulated to the desired output voltage.The AGF600-48S28-6L uses a rectifier to convert the AC signal to DC; this is done by diodes that only allow current to flow in one direction. It then uses an Inverter to convert the DC voltage to a higher AC voltage. The step-up transformer then transmits AC voltage of greater magnitude to the load. The resulting AC voltage is then rectified again, this time using a diode bridge, and then filtered by an LC filter to remove any residual AC components. The output voltage is then regulated using a voltage regulator.
The AGF600-48S28-6L is a highly reliable and efficient DC DC Converter, and its advantages include high efficiency, low heat generation, and robust operation. In addition, it is environmentally friendly and can reduce the amount of energy wasted in the conversion process. It is also suitable for a range of low to high current applications, making it suitable for a wide range of applications.
In conclusion, the AGF600-48S28-6L DC DC Converter is a powerful and efficient device that is widely used in the automotive, industrial and medical industries. Its advantages include high efficiency, low heat generation, and robust operation. In addition, it is suitable for a wide range of low to high current applications. It is an ideal choice for applications requiring an increased voltage output from low voltage sources or for DC motors.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
AGF600-48S28-6L | Artesyn Embe... | 75.95 $ | 1000 | DC DC CONVERTER 28V 600WI... |
AGF600-48S30-6L | Artesyn Embe... | 75.95 $ | 1000 | DC DC CONVERTER 30V 600WI... |
AGF600-48S50P-6L | Artesyn Embe... | 79.28 $ | 1000 | DC DC CONVERTER 28V 600WI... |
AGF600-24S28-6L | Artesyn Embe... | 80.69 $ | 1000 | DC DC CONVERTER 28V 600WI... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...