AHP500JB-6R2

Series:	AHP
Part Status:	Active
Resistance:	6.2 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 250°C
Features:	--
Coating, Housing Type:	Aluminum
Mounting Feature:	Flanges
Size / Dimension:	0.591" L x 0.650" W (15.00mm x 16.50mm)
Height - Seated (Max):	0.358" (9.10mm)
Lead Style:	Wire Leads
Package / Case:	Axial, Box
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors

The AHP500JB-6R2 is a popular chassis mount resistor, typically used in power distribution systems, switch mode power supplies, application control, and motor drives. It is a high-value, low-resistance resistor that can reliably handle up to 6 times its rated power. The resistor is mounted directly to the surface of the chassis and is designed to provide a safe, efficient connection.The AHP500JB-6R2 is able to provide a reliable connection between the power distribution system and the components of the electrical or electronic system. It has been designed to stand up to temperature and vibration extremes and can withstand a wide range of operating conditions, from a low of -55°C to a high of 125°C. The resistance value of the resistor is stable over its operating temperature range and is not affected by cyclic changes in temperature. The AHP500JB-6R2 has the ability to dissipate steady-state power at up to 8 watts. This is achieved by its construction, which allows for the heat generated by the resistor to be spread over a larger surface area. The resistor also features a high-temperature epoxy coating that protects the resistor against shock and vibration and helps to increase its overall ruggedness. The resistor has been designed for easy installation and replacement and can be connected to a terminal block or directly to the application’s chassis.The AHP500JB-6R2 operates on the principle of Ohm’s law, which states that the current passing through a resistor is directly proportional to the voltage applied across its terminals. In other words, the current passing through a resistor is equal to the product of the voltage and resistance. The AHP500JB-6R2 also utilizes a low-resistance design to help reduce the amount of energy lost due to the generation of heat. This makes the resistor highly efficient and helps make it a popular choice for applications that require a reliable, consistent electrical connection.In conclusion, the AHP500JB-6R2 is a chassis mount resistor that has been designed to provide reliable, reliable power distribution, switch mode power supplies, application control, and motor drives. It is a low-resistance, high-value resistor that can reliably handle up to six times its rated power. The resistor is also designed to dissipate steady-state power at up to 8 watts and features a high-temperature epoxy coating for protection. The resistor operates on the principle of Ohm’s law and utilizes a low-resistance design to help reduce the amount of energy lost due to the generation of heat. This makes the resistor highly efficient and helps make it a popular choice for applications requiring a reliable, consistent electrical connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description