AISC-1008-6R8G-T Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components used to store energy in the form of a magnetic field. The AISC-1008-6R8G-T is an inductor designed to hold a specific amount of energy for a set voltage. This makes it an ideal component for AC mains ripple suppression and filtering, as well as power conditioning and transient protection.

The AISC-1008-6R8G-T inductor is a high-frequency choke, meaning it maintains a near-constant inductance over a wide range of frequencies. This makes it suitable for applications in switching power supplies, signal conditioning, and other high-frequency applications. Its high operating frequency enables wide filter poles, allowing for implementation of low-pass and bandpass circuits.

The AISC-1008-6R8G-T has two terminals, each of which is connected to one winding of the core material. It is usually encased in an epoxy-potted casing to protect it from environmental degradation and moisture. The inductor has a tolerance of ± 10%, meaning it will perform within the specified range of the rating listed on its datasheet. It can also withstand a maximum operating temperature of +125°C.

The AISC-1008-6R8G-T employs the use of ferromagnetic material, such as ferrite or powdered iron, to produce a high inductance in the coil. These components insulate the windings from each other and reduce the magnetic noise generated by the inductor. The combination of inductance and insulation also stabilizes the inductor’s performance over a wide range of frequencies and temperatures.

The AISC-1008-6R8G-T operates on the principle that when current flows through a coil, a magnetic field is created. This magnetic field typically increases as more current is passed through the coil. The operating voltage of the AISC-1008-6R8G-T is 20 volts, allowing it to develop a higher magnetic field at higher frequencies. The inductor is then able to store energy in the form of this magnetic field and release it when the current reduces.

Fixed inductors are used widely in a range of power electronics applications. The AISC-1008-6R8G-T is designed to filter AC ripple, condition power supplies, and provide transient protection to sensitive circuits. With a high current rating, wide operating temperatures, and low inductance tolerance, the AISC-1008-6R8G-T is an ideal choice for filtering, conditioning, and protecting systems.

The specific data is subject to PDF, and the above content is for reference