AIUR-10-121K

Fixed Inductors

An inductor is a type of electrical component used in electronic circuits. It essentially consists of a coil of wire, usually wrapped around a ferromagnetic core, which stores electrical energy like a battery. Inductors can be used to filter signals, trap unwanted frequencies, and create time delays. They can also be employed in power conversion and regulation circuits.

The AIUR-10-121K is a fixed inductor that is widely used in a variety of applications including voltage regulation circuits, DC/DC power conversion, and power factor correction. It is designed to operate at frequencies ranging from 3 kHz to 3 MHz, and offers a wide range of inductance values from 0.1 mH to 10 mH. It features a compact design that makes it well-suited for use in small applications with limited space.

Working Principle

Inductors work by the principle of induction. When an AC voltage is applied to an inductor, an electromagnetic field is created, which induces current to flow through the coil. The effect is similar to a voltage induced in a transformer secondary winding, and the result is a current which is in phase with the applied voltage. The amount of current produced is proportional to the number of turns on the inductor.

The AIUR-10-121K produces a current when subjected to an AC voltage. It is designed with a specific number of turns on the coil that allows it to generate a current with a certain amplitude and frequency. The inductance value of the AIUR-10-121K is also predetermined to allow for specific levels of current generation.

Applications

The AIUR-10-121K is suitable for a wide range of applications. It can be used in voltage regulation circuits to create reference voltages for controlling the output current of a power source. It can also be employed in DC/DC power conversion circuits to regulate the input and output voltages. In power factor correction circuits, it can be used to smooth the input waves and reduce distortion.

In addition, the AIUR-10-121K can be employed in audio applications to filter unwanted noise. Inductors are also used in radio transmitters to create frequency-selective filters, and they can be utilized in circuits to create time delays or control signal amplitude.

Conclusion

The AIUR-10-121K is a fixed inductor that is widely used in a variety of applications. It operates at frequencies ranging from 3 kHz to 3 MHz and offers a wide range of inductance values. Its compact design allows it to fit into small applications with limited space. The AIUR-10-121K can be used in voltage regulation circuits, DC/DC power conversion circuits, power factor correction circuits, and audio applications.