AK6-430C-BP Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AK6-430C-BP TVS diodes are designed for data signal line protection. Their main task is to protect a circuit and conductors from surges. These components can clamp and divert high-voltage pulses, keeping them away from your devices.

TVS diodes, also known as Transient Voltage Suppression, have the ability to absorb and dissipate surges of electrical energy, allowing them to withstand transient voltage events and protect sensitive electronics from voltage surges. The most popular type of preference if these components is High Voltage Protection (HVP).

The AK6-430C-BP TVS diode sports a dual line protection design. It is composed of two TVS diodes connected in parallel, each having a different breakdown voltage. The combined structure of these two components gives this interface impressive protection features. The higher the breakdown voltage of the diode, the more capable it is to handle higher voltages.

The AK6-430C-BP has a maximum breakdown voltage of 300 volts approx. It also has an internal low level of parasitic capacitance that when is matched with high-frequency equipment creates less signal disturbance. Apart from that, this component also has a low power rating, low leakage current, and fast response time. It has a fast switching speed, at which it can suppress surge up to 30 kHz.

This diode is one of the most commonly used components for data line protection in PCIe Gen 3 frond-end applications, home cinema systems, and networking gadgets. It can also be used for general purpose ESD protection and for circuit board protection against over voltage transients.

AK6-430C-BP has three pins. One is connected to the anode, the second one is connected to the ground and the last one is connected to the cathode. It works by diverting any high-voltage surges to the ground, thus preventing any damage to the connected devices. The breakdown voltage is the voltage at which the TVS diode starts to conduct electricity.

When the voltage level on the anode becomes too high, due to a surge, the diode will start conducting current and channel the electricity to the ground. The higher the voltage of the diode, the more voltage it can withstand before it conducts. Once the diode conducts, it will divert the surge to the ground and the connected devices will be safe.

In short, the AK6-430C-BP TVS diode is an excellent choice for protecting electronic devices from voltage surges. It is designed to allow very high breakdown voltage and features fast response speeds, low power ratings, and low leakage currents. It is frequently used to protect data signal lines in a variety of controllers, home cinema systems, and other related components.

The specific data is subject to PDF, and the above content is for reference