AKSPT/Z-BLACK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AKSPT/Z-BLACK applications provide flexible solutions for a wide range of industrial and commercial applications. The primary application fields of AKSPT/Z-BLACK devices are flexible power connection, terminal blocks, shunts, and jumpers.

Shunts

Shunts are used to control current flow in electronic systems. They come in various sizes and ratings, and can be used to control large or small currents. Shunts provide more flexibility in controlling current than other current control devices, and are often used when precision control is required. They are used in a variety of electronic applications such as automotive electronics, consumer electronics, medical equipment, and communications equipment.

Shunts are connected between a power source and a load in order to divert some of the current from the source to the load. This reduces the current flowing through the load and increases the current flowing through the shunt. The shunt\'s resistance can be adjusted, allowing for precise control of the current in the system. The amount of current diverted through the shunt is determined by the shunt\'s resistance or by an external control.

Jumpers

Jumpers are used to connect two points in an electrical circuit. They are generally used to route currents in either DC or AC systems, and are used in a variety of electronic applications such as automotive electronics, consumer electronics, medical equipment, communications equipment, and computers.

Jumpers are usually installed between two circuit points for making optional connections. They are normally used as a temporary connection between two points, but can also be used as a permanent connection, depending on the application. Jumpers are usually made of copper or aluminum, but can also be made of other metals.

When connecting a jumper, it is important to ensure that the terminals of the jumper are properly secured and will not short circuit. Jumpers should be insulated to prevent parasitic capacitances from forming between the two points. It is also important to make sure that the current rating of the jumper is adequate for the application and that the jumper is suitable for use in the environment where it will be installed. Failure to do so could result in damage to the jumper and/or circuit.

The specific data is subject to PDF, and the above content is for reference