AL60A-048L-050F10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are electronic devices designed for transforming the voltage levels from one range to another. The AL60A-048L-050F10 is a type of DC-DC converter and is one of the most widely used ones. It is designed for use in a wide range of applications including industrial, automotive and communications applications, amongst others. In this article, we will explore the application field and working principle of the AL60A-048L-050F10 DC-DC converter.

Overview

The AL60A-048L-050F10 is a high power DC to DC converter with an input voltage range of 9 to 36 volts DC and an output voltage range adjustable from 0.2 to 5 volts. It also has excellent output voltage accuracy, low ripple noise and low EMI emission. The output is regulated and short-circuit protected with auto-recovery. The typical efficiency of the AL60A-048L-050F10 converter is up to 94%.

Applications

The AL60A-048L-050F10 is ideal for use in a variety of industrial, automotive, mobile, and communications applications. Some of the applications include:

• Automotive – powering electronics, sensors, and actuators.
• Industrial – powering robots and automated machinery.
• Mobile/Communications – powering portable devices such as phones, tablets, and laptops.
• Avionics/Aerospace – powering navigation and communications systems.

Working Principle

The AL60A-048L-050F10 is a switching power supply which converts a provided DC input of 9-36V to a regulated and adjustable output of 0.2-5V. It utilizes a high-quality switching converter circuit with a number of components that work together to pass the input direct current (DC) voltage through a step down circuit resulting in voltage and current regulation, as well as noise and interference rejection.

The main components of the AL60A-048L-050F10 include the main switch, transformer, rectifier, PWM controller, and power transistors among others. The working sequence of the DC-DC converter begins when the input DC voltage is supplied to the main switch. The main switch enables the pulse width modulation (PWM) controller, which is responsible for controlling the on and off time of the main switch.

The PWM controller will open and close the main switch at a specific frequency and duty cycle, controlling the output voltage. This will activate the main transformer, transferring the input voltage to the secondary side. The voltage on the secondary side is then rectified by an output rectification circuit and the required output voltage is regulated by the feedback circuit.

Benefits

The AL60A-048L-050F10 DC to DC Converter offers several advantages compared to linear voltage regulation. These include the following:

• High Efficiency: The use of a MOSFET switch instead of an electrolytic capacitor significantly increases the efficiency of the device, resulting in lower power dissipation.
• Longer Lifetime: Switched mode power supplies are far more reliable compared to linear voltage regulators, as they do not require thermal management.
• Flexibility: Switched mode power supplies can be adjusted to suit a number of different applications with adjustable output voltage.

Conclusion

The AL60A-048L-050F10 is a high power switching mode DC to DC converter designed for a range of applications including industrial, automotive, and communications applications. It has an excellent output voltage accuracy, low ripple noise and low EMI emission. It also offers many advantages over linear voltage regulation such as increased efficiency, greater flexibility, and longer lifetime.

The specific data is subject to PDF, and the above content is for reference