Allicdata Part #: | ALM-1322-BLKG-ND |
Manufacturer Part#: |
ALM-1322-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP VERY LO NOISE 5X6MM 22LD |
More Detail: | RF Amplifier IC Cellular, CDMA, W-CDMA, PCS, EGSM ... |
DataSheet: | ALM-1322-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 1.8GHz ~ 2.2GHz |
P1dB: | 17dBm |
Gain: | 29.9dB |
Noise Figure: | 0.57dB |
RF Type: | Cellular, CDMA, W-CDMA, PCS, EGSM |
Voltage - Supply: | 5V |
Current - Supply: | 100.2mA |
Test Frequency: | 2GHz |
Package / Case: | 22-SMD Module, No Lead |
Supplier Device Package: | 22-MCOB (5x6) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are electronic devices used to increase the amplitude of a signal. They make the signal stronger by amplifying its voltage, increasing its current, or both. They are used in a wide range of applications, including radio, audio, and video applications. One example of an RF amplifier is the ALM-1322-BLKG.
The ALM-1322-BLKG is a wideband RF amplifier designed for use in high power radio applications. It has a frequency range of 850-3500MHz, with a gain of 18dB. It features low noise figures and high total harmonic distortion. The amplifier is designed to work with signal levels from -50 to +10 dBm and has a 10dB unconditional stability margin. It is packaged in a compact, low profile 6mmx6mm package.
The ALM-1322-BLKG is used in a variety of radio applications. It is used in wireless microphone systems and transmitters, where it amplifies and controls the frequency and signal of incoming signals. In broadcast transmitters it helps to increase the power of the signal, allowing for a greater distance in transmission. It can also be used in cellular base station amplifiers to increase the power and distance of the signal. It is also used in satellite ground stations.
The working principle of the ALM-1322-BLKG is fairly simple. The amplifier uses a common source amplifier design, which uses bipolar transistors or field effect transistors in an arrangement known as push-pull. This arrangement amplifies the input signal and delivers it to the output stage, where it is further amplified and then outputted. The amplifier also has a biasing voltage that helps to set the transistors at the ideal operating point for maximum power output and linearity of the amplifier.
The ALM-1322-BLKG is an ideal RF amplifier for use in radio applications. It features a wide frequency range, high gain, low noise figures and high total harmonic distortion, as well as excellent stability. Its small form factor and robust design make it suitable for a variety of applications. Its simple design makes it easy to set up and use, while its performance ensures that it provides reliable and consistent output. As such, the ALM-1322-BLKG is a valuable tool for radio applications.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...