Allicdata Part #: | ALM-1712-TR1G-ND |
Manufacturer Part#: |
ALM-1712-TR1G |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP LNA GPS W/FILTER 12MCOB |
More Detail: | RF Amplifier IC GPS 12-MCOB (4.5x2.2) |
DataSheet: | ALM-1712-TR1G Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | -- |
P1dB: | 3dBm |
Gain: | 12.8dB |
Noise Figure: | 1.65dB |
RF Type: | GPS |
Voltage - Supply: | 3.6V |
Current - Supply: | 20mA |
Test Frequency: | 1.575GHz |
Package / Case: | 12-SMD Module, No Lead |
Supplier Device Package: | 12-MCOB (4.5x2.2) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ALM-1712-TR1G RF amplifiers are used in a variety of applications. The most general use is to amplify a low-power microwave or RF signal for transmission over long distances. This type of amplifier can also be used to boost the signal level of an incoming signal prior to processing. Additionally, the amplifier can provide additional gain or buffering to a complex system to control the signal power levels.
ALM-1712-TR1G amplifiers are device-level integrated circuits (ICs) that contain all the necessary components for amplifier operation. This includes a tunable output stage, a power amplifier (PA), an input stage, and an adjustment stage. Each stage is connected together to form the amplifier circuit, and each stage contributes to the final output of the amplifier.
The working principle of the ALM-1712-TR1G amplifier is the same as for any other type of amplifier. Generally, a low-power signal is applied to the input of the amplifier and an amplified version of that signal is produced at the output. The gain of the amplifier is determined primarily by the size of the output stage, and is controlled by the input and output impedances of the amplifier. The input impedance and the output impedance determine the frequency response of the amplifier. Similarly, the gain of the amplifier is affected by the power supply voltages as well as the bias currents of the PA.
ALM-1712-TR1G amplifiers can be used in both transmitter and receiver applications. In a transmitter application, the amplifier is designed to increase the power of the input signal before it is transmitted. This is accomplished by using a linear amplifier with a wide bandwidth and high gain. On the receive side, the amplifier is designed to increase the sensitivity of the receiver, allowing a smaller signal to be detected. The ALM-1712-TR1G amplifier can also be used in a variety of applications, including RFID tags, cellular towers, and satellite communications.
ALM-1712-TR1G amplifiers are compact, lightweight, and efficient devices. They require only a low voltage, low power supply for operation, and are therefore ideal for portable and mobile applications. In addition, the amplifier can be easily adjusted to provide the desired gain or signal boosting, and designed quickly to meet the application\'s needs. The amplifier also operates with a low noise figure, making it suitable for a variety of applications.
In conclusion, the ALM-1712-TR1G amplifier is a versatile device that can be used for a variety of applications. It offers high gain, low noise, and low power consumption, making it ideally suited for a variety of applications, including receiver front-ends and RFID tags. With its wide frequency response and adjustable gain, the amplifier can be tailored to meet the specific needs of any application.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...