ALM-1912-BLKG RF/IF and RFID |
|
Allicdata Part #: | 516-2286-2-ND |
Manufacturer Part#: |
ALM-1912-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP LNA GPS W/FILTER 9-MCOB |
More Detail: | RF Amplifier IC GPS 9-MCOB (2.9x2) |
DataSheet: | ALM-1912-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | -- |
P1dB: | -8dBm |
Gain: | 19.3dB |
Noise Figure: | 1.62dB |
RF Type: | GPS |
Voltage - Supply: | 4.5V |
Current - Supply: | 15mA |
Test Frequency: | 1.575GHz |
Package / Case: | 9-SMD Module, No Lead |
Supplier Device Package: | 9-MCOB (2.9x2) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are a type of amplifier designed to amplify signals in the radio frequency range. The ALM-1912-BLKG is a low power amplifier designed to amplify radio frequency signals from cellular phones operating in the GSM 900 frequency range. The amplification is achieved by using a power transistor in a linear configuration.
The ALM-1912-BLKG is designed to operate in two different modes. In the linear mode, the signal is amplified without distortion, and the output power level is determined by the bias voltage applied to the power transistor. When operating in the saturated mode, the transistor is driven into its saturation region, which provides higher gain, but with an accompanying increase in distortion.
The ALM-1912-BLKG is commonly used in transmitting antennas which employ the GSM 900 frequency band. The amplifier is configured in a linear mode so that the transmitted signal is not affected by any distortion. The amplifier is also used to boost power levels in receivers, allowing for longer transmission ranges. Additionally, it is use to improve the power efficiency of GSM 900 transmitters, since the amplifier consumes less power than the transmitter when amplifying signals.
The ALM-1912-BLKG\'s working principle is fairly simple. It has two symmetrically connected inputs and two symmetrically connected outputs. A signal is applied to the inputs, and the amplifier amplifies it. The amplified signal is then applied to the two outputs and is ready for further processing. The amplifier also has a control pin which enables users to modify the voltage applied to the power transistor, allowing for fine tuning of the amplifier gain.
The ALM-1912-BLKG is a very versatile and reliable RF amplifier, and its applications are diverse. Its ability to operate in both linear and saturated modes make it suitable for use in both transmitting and receiving applications. Additionally, its compact size and low power consumption make it a great choice for embedded applications. Overall, the ALM-1912-BLKG is a popular choice for those looking for a reliable and cost-effective RF amplifier.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...