Allicdata Part #: | 516-2360-ND |
Manufacturer Part#: |
ALM-31222-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP 1W PA 2GHZ 22MCOB |
More Detail: | RF Amplifier IC GSM, PCS, W-CDMA, WiMAX 1.7GHz ~ 2... |
DataSheet: | ALM-31222-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Cut Strip |
Part Status: | Obsolete |
Frequency: | 1.7GHz ~ 2.7GHz |
P1dB: | 31.5dBm |
Gain: | 14.9dB |
Noise Figure: | 2.7dB |
RF Type: | GSM, PCS, W-CDMA, WiMAX |
Voltage - Supply: | 5V |
Current - Supply: | 415mA |
Test Frequency: | 2GHz |
Package / Case: | 22-SMD Module, No Lead |
Supplier Device Package: | 22-MCOB (5x6) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are a type of signal processing device used to increase the force of a signal. The term refers to the amplification of any signal at radio-frequency bandwidths. This type of amplifier is used in many communication systems, such as those used by cellular towers, mobile devices, Wi-Fi, and satellite communication systems. In addition, RF amplifiers are used in non-radio applications, such as broadcasting, television, and audio too. The ALM-31222-BLKG is an example of a specific radio frequency amplifier, which has an application field focused on the military, medical, and aerospace industries.
The ALM-31222-BLKG and Its Applications
The ALM-31222-BLKG amplifier is a Class A linear amplifier which is designed to drive a high RF power output signal into a 50 ohm load without any signal distortion. It has a frequency range of 0.75 to 6 GHz with an output power of 18 dBm. It operates with a supply voltage of 5 Volts, drawing 2.75 Amps. It is also resistant to high levels of temperature and shock.
This amplifier is especially useful in the military and aerospace fields. In the military field, it is used for applications such as radar systems and communications. In the aerospace field, it is used for surveillance systems and radio-astronomy. Additionally, the ALM-31222-BLKG amplifier can be used in medical devices such as MRI and CAT scanners.
The Working Principle of the ALM-31222-BLKG
The working principle of this type of RF amplifier is based on a solid state linear amplification process. In this process, an input signal is applied to the amplifier input stage, which then amplifies it before sending it along to the next stage. This process is repeated through multiple stages before the output signal is produced. The number of stages and the amplification of each stage can be adjusted to get the desired output signal strength.
The first stage generally includes a dual diode rectifier, which converts the input AC signal into a DC signal. This DC signal is then applied to a low-noise amplifier (LNA), which amplifies the signal with minimal noise. The next stage is usually a low-power amplifier (LPA), which amplifies the signal more while introducing little noise. After passing through these stages, the signal is then amplified further by one or multiple power amplifiers (PAs), which output a much larger signal strength.
Conclusion
The ALM-31222-BLKG amplifier is an example of a radio-frequency amplifier. It has a wide range of applications in the military, medical, and aerospace industries. This amplifier operates using a solid state linear amplification process that consists of multiple stages in order to produce an output signal with an increased strength. This type of amplifier is designed to provide reliable output with minimal noise and distortion.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...