ALSR0139R00FE12

Series:	ALSR
Packaging:	Bulk
Part Status:	Active
Resistance:	39 Ohms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	-65°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.110" Dia x 0.406" L (2.79mm x 10.31mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors:ALSR0139R00FE12

Through hole resistors are components that can be used to control the flow of electricity in a device or circuit. Commonly known as "THRs", these components are used in a variety of applications, including current limiting circuits, voltage division, impedance matching, and signal conditioning. One of the most common THR types is the ALSR0139R00FE12.The ALSR0139R00FE12 is a through hole-type resistor that is designed for use in high-temperature and harsh environment applications. This particular THR features a hermetically sealed construction, providing superior protection against dust, moisture, and other contaminants. The device is constructed using a high-temperature ceramic substrate, which enables it to withstand temperatures up to +250°C. In addition, the THR has a low-temperature coefficient, providing enhanced accuracy over a wide temperature range.The ALSR0139R00FE12 has a wide range of applications, including automotive, industrial, and aerospace applications. The THR can be used as a current limiting device in automotive applications, helping to maintain a safe and reliable electrical system. In industrial applications, the THR can be used as a voltage divider, helping to maintain accurate voltage levels across a circuit. In aerospace applications, the THR can be used as an impedance-matching device, helping to improve the accuracy and precision of signals.The ALSR0139R00FE12 has a simple structure and works by offering resistance to the flow of current. The THR consists of two main components: a resistive element and a capacitor. The resistive element is the main part of the THR, and it is responsible for providing resistance to the flow of current. This is done by connecting the element to the outside circuit through two terminals.The capacitor is used to reduce electrical noise produced by the THR. This is done by connecting the capacitor to the external circuit, which helps to reduce the amount of electrical noise that is produced. Once the THR is connected to the external circuit, it will provide resistance to the current, allowing the desired level of voltage and current to be maintained.The ALSR0139R00FE12 THR is a device that can be used in a variety of applications, allowing engineers to achieve their design goals. The THR’s hermetically sealed construction ensures the device is protected from harsh environmental conditions, and its low temperature coefficient ensures that the device provides accurate readings in a wide range of temperatures. In addition, the THR’s simple structure and resistive element make it easy to use, offering a reliable and cost-efficient solution for many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description