AM4406FMTR-G1 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Motors/Drivers/Controllers are important types of power management integrated circuits (PMICs), featuring multi-channel outputs capable of driving a wide range of devices, including actuators, relays and motors. As a type of PMIC, the AM4406FMTR-G1 works in four different modes, such as forward/reverse control, stepper motor control, desk motor control, and overlap PWM control. This device is specifically designed for driving of 12/24V brush DC motors, 12/24V linear actuators, gates, etc. It also supports over-current and over-voltage protection to protect motors from damage.

The working principle of AM4406FMTR-G1 is based on its four working modes, which rely on two signals for power management. The first signal is the power enable signal, which controls the motor power supply voltage (V motor_power) through a logic level. The second signal is the control signal, which carries the feedback of current rotational speed of the motor. After the power enable signal is given, the motor current can be adjusted according to the control signal.

In Forward Control Mode, the direction of the motor is determined by the control signal. When the direction of the control signal is upward, the current of the motor rotates in one direction, while if the control signal is downward, the motor will rotate in opposite direction. In Reverse Control Mode, the direction of rotation is the same as forward mode, but it is controlled through an analog signal.

The Stepper Motor Control Mode works by constantly changing the power supply voltage according to the control signal. The voltage variation is responsible for adjust the rotation speed and direction of the motor. The Direction Change Detection Mode is conducive for detecting the speed and direction of the motor and to drive the motor accordingly. Here, a Hall signal is applied to the input signal to detect the direction of rotation.

The Overlap PWM Control Mode is used to directly control the power supply voltage to the motor based on the pulse width modulation. This mode is suitable for positioning and controlling purposes, as well as for the speed regulation. In addition to these working modes, the device also supports external brake control and an FWD/CS signal limit, making it suitable for many different applications.

Overall, AM4406FMTR-G1 is an ideal device for motor/driver/controller applications. It is also capable of providing a variety of protection features, such as over-current protection, voltage protection and overheat protection. Furthermore, the device is suitable for both 12V and 24V motors, making it a versatile and reliable choice for motor-driving applications.

The specific data is subject to PDF, and the above content is for reference