AM50051A53-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches can be commonly seen in our daily life. Our AM50051A53-A Limit Switch is a small, compact, single-pole, single-throw, momentary action device, which is designed as a replacement to rotary switches and other forms of externally actuated switches. Basically, the AM50051A53-A switches use a combination of mechanical force, a contact actuator, and an available contact system to detect and make or break an electrical circuit.

The application field of AM50051A53-A Limit Switch include automation, robotics, material handling systems, industrial machinery, vending machines, HVAC equipment, medical equipment, and many more. The most common application is as part of a circuit protection device that monitors the operation of an electrical system. In addition, the AM50051A53-A switch may be used as standalone safety device in hazardous areas.

The AM50051A53-A Limit Switch features a snap action which is actuated by electromagnet, plunger, roller lever, or by other means. The clicking sound from the moving contacts is easily heard, providing an indication when a control position changes. When used in a circuit control device, once the embedded switch has been actuated, a signal is sent to the controlling circuit, typically a controller, that alters the current state or action of the circuit. This could be to turn on or off a motor or to start or stop a factory processes.

The AM50051A53-A limit switch has a standard wiring configuration and uses three wires to form a complete circuit. To ensure that the switch operates durable, a pre-load rate is applied to the contact. The operating temperature of the AM50051A53-A Limit Switch varies between -20~125℃. In addition, the total travel range and the rated voltage depend on the actuator and contact used.

The AM50051A53-A Limit Switch works by allowing electric current to flow from one terminal to the other. The movement of the internal contact actuates either an open or closed circuit. In an open circuit, the switch’s contact is apart and there can be no electrical current flow. In a closed circuit, the switch’s contact is connected and holds the circuit together, allowing electric current to pass through.

AM50051A53-A Limit Switch is actuated by a physical motion or force. The motion or force compresses the contact on a mating surface and creates a connection between the contact and the mating surface. When the force is removed, the switch returns to its initial state and the contact is open. Therefore, the actuation signals in the form of physical motion or force can be used to control the function of the switch.

In summary, the AM50051A53-A Limit Switch is a snap action device designed to control the operation of an electrical circuit. It is widely used in automation, robotics, industrial machinery, vending machines, HVAC equipment, medical equipment and many other application fields. The AM50051A53-A Limit Switch will detect and make or break an electrical circuit when it is actuated by electromagnet, plunger, roller lever, or by other means.

The specific data is subject to PDF, and the above content is for reference