AMCA31-101-2R450G-S1F-T3 RF/IF and RFID

Return Loss:	--
Applications:	Bluetooth, Wi-Fi
Height (Max):	0.047" (1.20mm)
Mounting Type:	Surface Mount
Ingress Protection:	--
Termination:	Solder
Features:	--
Power - Max:	3W
Gain:	0.5dBi
Series:	--
VSWR:	2
Number of Bands:	1
Antenna Type:	Chip
Frequency Range:	--
Frequency (Center/Band):	2.45GHz
Frequency Group:	UHF (2 GHz ~ 3 GHz)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The AMCA31-101-2R450G-S1F-T3 is an RF antenna that is capable of transmitting or receiving signals over radio frequencies (RF). It can be used in applications such as telecommunications, broadcast, and amateur radio. The AMCA31-101-2R450G-S1F-T3 is designed to be an omni-directional antenna that is able to work at a wide range of frequencies, making it an ideal choice for applications that require broad coverage.

Design and Construction

The AMCA31-101-2R450G-S1F-T3 has been designed to be an omni-directional antenna, with a broad frequency range that extends from 2.450GHz to 2.500GHz. The antenna has a 3 dB gain, which is higher than most standard omni-directional antennas. It also has a uniform radiation pattern, which means that it is able to send or receive signals from all directions and not just from one direction. The antenna is constructed of two main components; the radiating element and the antenna body. The radiating element is the part of the antenna that actually emits and receives radio waves, and it is made up of a helix of wire, surrounded by a metal plate. The antenna body is made out of a durable plastic and contains the radio circuit that allows it to function. The radiating element and the antenna body are connected by an electrical connector and an antenna cable.

Installation and Mounting

The AMCA31-101-2R450G-S1F-T3 can be mounted either on a wall or on a mast. The antenna requires a surface area of at least 1.2m² and should be installed at a height of at least 2m. When mounting the antenna on a wall, it is important to make sure that the antenna is securely attached and not subject to any vibrations. When mounting the antenna on a mast, it must be secured with at least two stainless steel U-bolts. A flame retardant rubber ground bushing should also be used to ensure proper grounding of the antenna. It is also important to make sure that the antenna is facing the desired direction and is not exposed to any weather.

Working Principle and Application

The AMCA31-101-2R450G-S1F-T3 operates by converting radio frequency emissions into electrical signals that can be amplified and transmitted or received by other devices. Its wide frequency range and omni-directional design make it a suitable choice for applications such as wireless communication, broadcasting, and amateur radio. In wireless communication, the AMCA31-101-2R450G-S1F-T3 antenna can be used for transmitting and receiving signals between two remote points. The antenna can also be used to broadcast signals, such as FM or AM radio signals, to a wide area. On top of that, the antenna can also be used by amateur radio enthusiasts to communicate with other radio users.

Conclusion

The AMCA31-101-2R450G-S1F-T3 is an RF antenna that is suitable for a variety of applications. It has a wide frequency range, a 3 dB gain, and an omni-directional design, making it ideal for broadcasting, wireless communication, and amateur radio use. The antenna can be easily installed and requires minimal maintenance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description