AMCV-0603-140-C101N-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS-Varistors, MOVs

TVS (also known as varistors, voltage-dependent resistors, transient voltage suppressors) are designed for quick and reliable overvoltage protection. MOV (metal–oxide varistors) may provide protection against overvoltage during power disturbances. They are used on power lines, telephone lines, data lines, and other electrical systems with high transient voltages.

AMCV-0603-140-C101N-T is a transient voltage suppressor varistor which is used to protect circuits from transient overvoltage (spikes). These devices are widely used for suppressing transient voltages in telecommunications, industrial electronics, audio and video, and automotive applications.

Application Field

AMCV-0603-140-C101N-T is designed primarily for applications that call for transient voltage suppression. They are especially well suited for the protection of sensitive electronic components and circuits against damaging transients in the voltage range-08 Volt to 28 Volt. They are typically used in portable telecommunication equipment such as cellular phones and other equpment for overvoltage protection. In the automotive industry,they can be used in vehicles for protection against alternator transients, electronic ignition, short circuit of electric system, and reverse battery connection.

Working Principle

AMCV-0603-140-C101N-T are non-linear devices, which provides a path to ground for surge current to reduce the surge voltage to safe levels. A varistor has two terminals that are connected to two electrical conductors. When an overvoltage occurs, the electrical current flows through the varistor and they clamp the voltage to a safe level. During a voltage spike, some of the energy is used to bypass the surge current to ground, so that it does not get the device itself.

The varistor operates at a specific voltage with a low impedance. The current flows through the varistor until the voltage reaches the clamping threshold. At this threshold, the varistor has a much higher impedance, which prevents the increased current flow from further damaging the circuit.

AMCV-0603-140-C101N-T has a maximum sustained voltage of 30V and a peak pulse power of 140W. The maximum capacitor discharge current is 2A and the response time is 0.3 μs. The varistor also has a very fast response to transient overvoltage, allowing it to clamp the voltage to safe levels quickly.

In summary, AMCV-0603-140-C101N-T is a TVS varistor designed primarily for applications that call for transient voltage suppression. It is widely used for suppressing transient voltages in telecommunications, automotive, industrial electronics, audio and video applications. The varistor has two electrical terminals for connection and operates at a specific voltage, clamping overvoltage quickly and effectively.

The specific data is subject to PDF, and the above content is for reference