ANT7020LL05R2400A RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF antennas are an integral part of creating wireless communication networks. They are used to send and receive radio waves from a remote location. The antenna is the primary element in a wireless network system and acts as the conduit for radio energy propagating in a given direction or omnidirectional throughout a certain degree. The size of the antenna and the polarization of the antenna determine the area of coverage and the signal strength. The ANT7020LL05R2400A is a popular RF antenna used in a variety of applications.

The ANT7020LL05R2400A is a directional antenna designed for less than 5 GHz frequency bands. It is a light-weight antenna and is perfect for mobile applications. Its small size makes it suitable for unmanned aerial vehicles (UAVs) and other commercial applications. The antenna has a gain of up to 24 dBi and a maximum signal range of 300 kilometers. The antenna also offers a wide bandwidth of 10MHz to 16GHz.

The ANT7020LL05R2400A was designed to increase the signal strength of wireless communication networks and ensure that signals can reach their destination. It can be used in a variety of applications such as point-to-point links, wireless networks, and broadcasting. The antenna is also suitable for wireless fidelity (WiFi) networks as it provides increased signal strength and range.

The ANT7020LL05R2400A is composed of a radiating element, a parabolic reflector, and a feedhorn. The radiating element is responsible for radiating/receiving the signal, while the reflector and the feedhorn act to focus the incoming/outgoing energy towards/away from the antenna. This combination allows for a highly directional signal to be created.

The radiating element of the ANT7020LL05R2400A is a flat dipole antenna. A flat dipole antenna is composed of two rectangular conductors laid out in a flat plane and placed a certain distance apart. The distance between the conductors determines the antenna\'s frequency range. The antenna works by reflecting any incoming signal off one of the conductors and then onto the other. This effectively creates a standing wave of energy between the two conductors and thus creates a directional wave pattern.

The parabolic reflector helps to further enhance the directional characteristics of the antenna. It consists of a curved surface made of thin metal. The surface is designed to redirect the signal in a particular direction. The reflector works by focusing the incoming signal onto the radiating element, increasing the signal strength and range.

The feedhorn is the last component of the ANT7020LL05R2400A. It works by converting the incoming signal to radio waves that can be further amplified and then broadcast or received by a recipient. The feedhorn consists of two concentric cylinders connected by a metal wire. The inner cylinder amplifies the signal while the outer one acts like a waveguide to further focus the waves.

The ANT7020LL05R2400A is an effective solution for many wireless communication applications. It is a light-weight, directional antenna with a maximum gain of 24 dBi and a range of 300 kilometers. The antenna offers a wide range of applications such as point-to-point links, wireless networks, broadcasting, and WiFi networks. It is composed of a radiating element, a parabolic reflector, and a feedhorn, which all work together to create a directional signal.

The specific data is subject to PDF, and the above content is for reference