AOCJY1-26.000MHZ

Frequency Stability:	±50ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.307" (7.80mm)
Size / Dimension:	0.819" L x 0.520" W (20.80mm x 13.20mm)
Package / Case:	14-DIP, 4 Leads (Full Size, Metal Can)
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	0°C ~ 50°C
Series:	AOCJY1
Voltage - Supply:	3.3V
Output:	CMOS
Function:	--
Frequency:	26MHz
Type:	OCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

AOCJY1-26.000MHZ is an oscillator that is commonly used in communications systems, such as cell phone signals and military applications. This oscillator operates at a frequency of 26.000MHz using the crystal oscillator principle. The oscillator utilizes a quartz crystal to vibrate at a certain frequency to produce a periodic signal that can be used to synchronize communications systems.

Application Field

AOCJY1-26.000MHZ oscillator is normally used in cellular base stations, DBS, satellite receivers, radar systems, navigation systems and other communication systems where crystal precision, low cost and high stability are important considerations. Its applications also extend to PLL phase locked loop, resonant frequency, IC integrated circuits, TV and so on.

Working Principle

AOCJY1-26.000MHZ oscillator works by using the piezoelectric effect of a quartz crystal to vibrate or "ring" at its resonant frequency. The quartz crystal is attached to two electrodes which serve as the input and output terminals. An electrical signal from the input terminal is applied to the quartz crystal and causes it to vibrate. The vibrating crystal then produces a periodic, oscillating electrical signal at its resonant frequency at the output terminal. This oscillating signal can then be used as the reference frequency for synchronizing communications systems.The frequency stability of the quartz crystal oscillator is based on its ability to return to its original resonant frequency following a disturbance. This is called the quartz crystal(s) Q factor. The higher the Q factor of the quartz crystal, the more stable the output frequency of the oscillator.

Conclusion

AOCJY1-26.000MHZ is a type of quartz crystal oscillator that is commonly used for a variety of communications applications. Itoperates at a frequency of 26.000MHz and uses the crystal oscillator principle. Its applications range from cellular base stations to PLL phase locked loop and IC integrated circuits. The oscillator works by vibrating a quartz crystal at its resonant frequency to produce a periodic, oscillating electrical signal that can be used as a reference frequency for synchronizing communications systems. Finally, the frequency stability of the oscillator is dependent upon the Q factor of the quartz crystal, with higher Q factors providing greater stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description