AOCTQ5-X-10.000MHZ-M10-SW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components which generate a repetitive output signal. The AOCTQ5-X-10.000MHZ-M10-SW is an electronic oscillator with a frequency range of 10.000 MHz. Its main application fields are clocks, signal generators, timers, and frequency counters.

Application

The AOCTQ5-X-10.000MHZ-M10-SW oscillator is commonly used in digital systems to provide a high-speed clock frequency required by CPUs and microprocessors. It is also used in linear circuits to provide a high-frequency clock signal for data transfer and analog-to-digital converters. Additionally, the oscillator can be used to modify the pulse width or switching speed of digital circuits.

The oscillator finds applications in various other devices such as microcontrollers, digital signal processors, memory controllers, remote control systems, and frequency counters. In addition, it has been used in the design of wireless communication systems, radar systems, navigation systems, and oscilloscope time-base circuits.

Working Principle

The AOCTQ5-X-10.000MHZ-M10-SW oscillator is based on the Pierce oscillator topology. This type of oscillator is a feedback oscillator circuit in which a single bipolar transistor serves as an amplifier and an active device. The amplifier is connected to a positive-negative feedback network consisting of a capacitive and resistive element.

The signals generated by the amplifier are fed back to the input of the amplifier through the feedback network. This feedback causes the amplifier to oscillate at its natural resonant frequency. The oscillator is usually designed with the ability to stabilize output frequency, minimize phase noise, and provide wide frequency range.

The oscillator includes an oscillator circuit, an output buffer, and voltage-controlled crystal oscillator (VCXO). The oscillator circuit consists of an amplifier, a clock source, and an output buffer. The clock source typically contains a tank oscillator with a quartz crystal. The output buffer functions as a buffer between the oscillator output and the output. The output buffer amplifies the oscillator output and can be used to adjust the output impedance. The VCXO is used to adjust the frequency of the output signal.

The AOCTQ5-X-10.000MHZ-M10-SW oscillator also includes a digital switching circuit which is used to control the output frequency. This feature enables the oscillator to be used in a wide range of applications. The oscillator can be used to provide a stable output frequency over a wide operating temperature range.

In conclusion, the AOCTQ5-X-10.000MHZ-M10-SW oscillator is a widely used electronic component. Its main application fields are clocks, signal generators, timers, and frequency counters. It is based on the Pierce oscillator topology and utilizes a clock source, an output buffer, and a VCXO to adjust the output frequency. Additionally, the oscillator includes a digital switching circuit to provide a wide range of output frequency.

The specific data is subject to PDF, and the above content is for reference