AOLFD212602DNUY

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pushbutton Switches are electromechanical components used for the purpose of controlling a circuit. They are typically used to start and stop a motor, operate a switch, or open or close a circuit. The AOLFD212602DNUY is one type of pushbutton switch, which is designed to provide a wide range of applications and is particularly well-suited for higher current applications.

The AOLFD212602DNUY consists of a metal body and an insulated double-pole base with an insulated actuator that is firmly attached to a metal pushbutton. A single-pole-circuit breaker is located inside the metal body and is equipped with a series of contact points that are set at intervals along the length of the switch. The contact points can be switched on and off by the actuation of the pushbutton.

The contact points consist of two pairs of plates that are insulated from each other and connected to two separate circuits. When the contact points are in the open position, the current in the circuit is interrupted and the circuit remains open-circuited. When the contact points are in the closed position, the current in the circuit is allowed to flow and the circuit remains closed-circuited. This allows the switch to be used for both starting or stopping a motor or opening or closing a circuit.

The AOLFD212602DNUY can also be used for controlling the operation of an electrical appliance, such as a fan or air conditioner. It can also be used to control the voltage in a circuit. The switch can be wired in either a single or multiple-pole configuration, depending on the application. In a single-pole configuration, the switch is used to open or close a single circuit, and in a multiple-pole configuration, the switch is used to open or close multiple circuits.

The AOLFD212602DNUY is also capable of being used as a safety device. By installing a safety interlock in the actuator of the switch, it can be ensured that the circuit remains closed-circuited if the contact points become open. In addition, a contact timer can be connected to the switch to provide additional safety, such as a time delay before the circuit can be opened again. This can be used to prevent an overload or short circuit in the circuit.

The AOLFD212602DNUY is a versatile switch and is ideal for applications where current control is needed. Its wide range of applications makes it well-suited for control engineering and industrial machinery. Its ability to be configured in multiple-pole configurations makes it suitable for a wide range of applications in both the low voltage and high voltage ranges.

The specific data is subject to PDF, and the above content is for reference