AP2141WG-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC- Power Distribution Switches, Load Drivers are a type of power management IC (PMIC) commonly used in electronic systems to control and regulate power. They contain a switching regulator to convert a given input voltage (generally 5V) to a lower output voltage, and also contain logic to control and drive the switch.

The AP2141WG-7 is a low power PMIC that uses two NMOS transistor output drivers. It is designed to drive low voltage loads in a wide variety of applications. It offers a wide range of operating supply voltages, high and low output voltage accuracy and fast switching performance. The AP2141WG-7 has adjustable frequency and can be controlled either with an external voltage or through a logic input.

The AP2141WG-7 uses two n-channel MOSFETs to control the power to the output load. At the start of each switching cycle, the voltage at the output node is set to a predefined value determined by the internal logic. Then, a signal is sent to the gate of the n-channel MOSFET, causing it to turn on. The current then flows through the n-channel MOSFET, turning on the output node.

The current flowing through the n-channel MOSFET then passes through a negative temperature coefficient thermistor, which is connected to the voltage output node. This thermistor decreases the current flow when the temperature at the output node rises, thus preventing overheating. During the switch off cycle, the n-channel MOSFET is turned off and the current flow stops immediately.

The AP2141WG-7 uses an adaptive burst mode, which allows it to control the output voltage at a preset level. As the load demand changes, the AP2141WG-7 automatically adjusts the burst mode to maintain a constant output voltage. This mode of operation is especially useful in applications that require low power consumption and high accuracy, such as laptop computers, cell phones, and other portable electronic devices.

The AP2141WG-7 also provides an interrupt mode, which allows external signals to be sent to the chip when a certain threshold is reached. When this interrupt mode is active, the output node will be disabled and the load will be turned off until the interrupt mode is disabled. This feature is useful for protecting the system from any accidental loads or voltage spikes.

The AP2141WG-7 is an excellent choice for applications requiring low standby current and high performance for voltage regulation. It offers a wide operating supply voltage, high output voltage accuracy, fast switching performance, and adaptive burst mode. Its features make it an ideal choice for powering and controlling loads in various applications such as laptops, cell phones, portable media players and other portable devices.

The specific data is subject to PDF, and the above content is for reference