AP2815CMM-G1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AP2815CMM-G1 is a power management integrated circuit (PMIC) produced by Diodes. The PMIC includes power distribution switches and load drivers. It is a current-sinking, high-side low-side open-drain switch with an external diode connected with the output. The PMIC is suitable for controlling power from a 24V supply to connected load.

AP2815CMM-G1 has an adjustable voltage range of 1.8V to 24V, a current capacity of 1A, and a switching speed of up to 500kHz. The output port can be switched on and off using an enable input and the device supports on/off, PWM, and linear operation. The device is built using an N-channel FET, a power MOSFET, and an open-drain logic-controlled FET.

The main application field of AP2815CMM-G1 PMIC is in automotive and industrial systems. It is suitable for applications such as HVAC, power management, motor and actuator control, motor switching, and current measurements. It is also suitable for controlling powering heavy loads and operating digital switches for devices that operate over long distances.

The AP2815CMM-G1 works on a principle where an external diode is connected to the output in order to prevent the output from sinking any current. It also provides an adjustable voltage supply which can be used to control the output of the device. The external diode helps prevent current from being drained from the device, allowing it to operate reliably over a wide temperature range.

The PMIC features reverse-battery protection in order to protect against unexpected damage to the device due to improper power supply. It also features extended Vsupply range protection up to 28V. The protection circuit helps the device in operation even if the output voltage goes above the rated supply voltage.

The AP2815CMM-G1 has a built-in thermal protection circuit. This helps reduce the stress on the device by immediately shutting off the switching FET in case the junction temperature of the device exceeds 125°C.

AP2815CMM-G1 is a powerful PMIC for automotive and industrial systems. It is a high-side, low-side open-drain switch with an adjustable voltage range and reverse-battery protection. It also provides a thermal protection circuit to reduce stress on the device and its components. The external diode helps prevent current from being drained from the device, allowing it to operate reliably in a wide temperature range.

The specific data is subject to PDF, and the above content is for reference