AP3301EV1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC and AC to DC (Off-Line) SMPS or Switch Mode Power Supplies (SMPS) are used to convert electrical energy from a DC or AC source to a DC or AC load. The AP3301EV1 is a DC to DC SMPS controller IC specifically designed for use in point of load (POL) applications. Its main features include a wide input voltage range from 4.5 V to 48 V, high power efficiency of up to 90%, adjustable switching frequency from 200 kHz to 500 kHz, and Active Dead-Time Control (ADTC).

The AP3301EV1 is designed to control both single-ended and double-ended buck or boost SMPS configurations. Its main functions include ramp generation, power regulation, error amplifier compensation, fault protection, and EMI control. Additionally, it has three internal operation modes: Burst Mode (BM), Discontinuous Conduction Mode (DCM), and Forced PWM Mode (FPWM).

The AP3301EV1 is highly versatile and can be used in a wide range of applications. Examples include telecom and networking equipment, IP set-top boxes, servers, medical equipment, power supplies, and consumer electronics. It is ideal for applications that require low switching noise, high efficiency, and small form factor. Its robust design and high performance make it an attractive solution for designers looking to reduce cost and time-to-market.

The AP3301EV1 is designed to be simple and easy to use. It includes all the necessary functional blocks for a complete power supply system, such as a built-in gate drive, high-side and low-side power MOS switches, a voltage regulator/referencing circuit, sensing and comparator circuits, and an integrated feedback control loop. It also has additional features such as a switch-to-high and switch-to-low time-delay protection circuit, under-voltage protection, over-temperature protection, and output short-circuit protection.

The AP3301EV1 is powered by a pair of input terminals, VINH and VINL. When an input voltage is applied, the AP3301EV1 uses an integrated pulse-width modulation (PWM) modulator to convert the input voltage to an output voltage. A compensator circuit is also used to adjust the output voltage to the set target voltage as well as to regulate it dynamically during transient conditions. The AP3301EV1 also includes a built-in oscillator with two operational modes, fixed 400 kHz and adjustable from 200 kHz to 500 kHz.

The AP3301EV1 is also designed to feature a suite of EMI control features, such as spread-spectrum modulation, frequency modulation, and harmonic reduction, to minimize EMI radiation. Additionally, it has several fault conditions which cause the SMPS output to be shut down, such as Over-Current Protection, Over-Voltage Protection, Over-Temperature Protection, and Under-Voltage Protection.

Overall, the AP3301EV1 is an excellent IC for DC to DC or AC to DC SMPS applications. Its wide input voltage range, adjustable switching frequency, high power efficiency, and integrated EMI control make it an ideal choice for designers looking for an efficient and cost-effective solution for their power supply requirements.

The specific data is subject to PDF, and the above content is for reference