APC08F03-J

Voltage - Output 3:	--
Size / Dimension:	1.32" L x 0.53" W x 0.28" H (33.5mm x 13.5mm x 7.1mm)
Package / Case:	7-SMD Module
Mounting Type:	Surface Mount
Efficiency:	93%
Operating Temperature:	-40°C ~ 85°C
Features:	--
Applications:	ITE (Commercial)
Power (Watts):	30W
Current - Output (Max):	8A
Series:	APC08
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	6V
Voltage - Input (Min):	4V
Number of Outputs:	1
Type:	Non-Isolated PoL Module
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DC-DC converters are electronic components that convert direct current (DC) from one voltage level to another. In other words, they change the electrical energy from one DC voltage to another. There are several types of DC-DC converters, such as DC-AC inverters, transformers, and non-isolated converters. One of the most popular types of DC-DC converters is the APC08F03-J.

APC08F03-J Application Field

The APC08F03-J is particularly useful for applications in which the input MOSFET must drive high capacitive loads with low Rds(on). These include LCD TVs, audio amps, solar inverters, LED lighting, and other high-power applications. The device has an integrated level shifter that assists with fast, smooth transition, allowing for higher efficiency and reduced switching losses.

APC08F03-J Working Principle

The APC08F03-J works by using a resistor, a capacitor, and an inductor to reduce the voltage across the switching element. The device has two legs, a low side and a high side, and can drive currents up to 1A. First, the low side switches on, and the current flows through the inductor, storing energy in it. This current eventually reaches a maximum, which is determined by the size of the inductor. Then, when the resistance and capacitance of the device are balanced, the high side switches on, urging current to flow in the opposite direction. In the process, the current flowing through the inductor is reduced, its magnetic field collapses, and the electro-magnetic feedback mechanism takes effect. This causes most of the energy stored in the inductor to be absorbed in the switching element, not the capacitor. This allows for a significantly better power efficiency than other converter designs.Finally, the switching occurs until the output should reach the desired level. At this point, both the high side and low side are off and the output is set. Once the desired output is obtained, the process can be repeated.

Benefits of APC08F03-J

The APC08F03-J offers a number of benefits for applications in which it is used. One of the biggest benefits is its high efficiency. The device is designed to minimize switching losses and allow for higher levels of output current, meaning less wasted energy and improved power efficiency. Additionally, the device is capable of driving high capacitive loads, which helps reduce potential power fluctuations caused by load variations.Another benefit of the device is its low cost. This is especially attractive for those looking to build high-power applications on a budget. Finally, the integrated level shifter makes it easier to transition between the low side and high side, helping ensure a smooth transition between voltages.

Conclusion

The APC08F03-J is a type of DC-DC converter that is particularly useful for applications needing higher current levels. The device is capable of driving high capacitive loads with minimal losses in efficiency and is relatively inexpensive compared to other converter types. Additionally, the integrated level shifter helps ensure a smooth transition from one voltage level to the next. All of these factors make the APC08F03-J an attractive choice for any designer looking for high-performance power solutions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description