APL00111-24702-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Circuit Breaker, or APL00111-24702-2, is an essential component of any electrical system. It is designed to prevent short-circuits and offer protection to equipment and personnel from the potential for destruction or damage due to overload or accidental current beyond a safe limit.

The APL00111-24702-2 is a ground-fault circuit interrupter designed for the signal line safety system. It is rated for 250VAC and is certified for use in industrial and commercial hazard free applications. This device is designed to detect and trip on ground-fault current up to 0.1mA at the input terminals. It has an adjustable time delay setting to de-energize the circuit in the event a ground-fault is detected. The adjustable time delay is adjustable from 0.03 to 30 seconds.

The APL00111-24702-2 is designed to provide fast de-energization of equipment and personnel in a short period of time. This allows equipment and personnel to safely shut down in the event of a ground-fault or other hazardous condition. The device also provides a reset switch which can be used to reset the device after it has tripped. This reset switch can also be used to reset the time delay setting on the device.

The APL00111-24702-2 has two main components; the sensing element and the circuit breaker. The sensing element consists of a thermo-electric switch and a micro-switch. The thermo-electric switch is designed to sense the temperature increase caused by a ground-fault current and trips the circuit breaker. The micro-switch is designed to detect the over-current condition and trips the circuit breaker.

The circuit breaker then closes the circuit until the alarm is activated. The alarm is a loud audible buzzer that is activated when the circuit breaker is tripped. The alarm will continue until the fault is corrected and the circuit breaker is reset. Once the fault is corrected and the circuit breaker is reset, the system will then be ready for normal operation.

The APL00111-24702-2 is designed to provide over-current protection in hazardous areas and is certified for use in industrial and commercial hazard free applications. This device can reduce the risk of damage to equipment and personnel caused by over-currents or accidental current beyond a safe limit. It also offers additional features that can make the operation of equipment safer and more efficient.

The specific data is subject to PDF, and the above content is for reference