APL11-4088-1 Circuit Protection

Series:	APL
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	2
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers

The APL11-4088-1 Circuit Breaker is a type of a circuit breaker designed to provide protection to applications requiring a wide range of current capacities. It is designed for small-scale installations where higher-capacity circuit breakers may not be suitable. This circuit breaker is primarily intended for use in commercial and industrial applications.A circuit breaker is an electrical device that can help to protect a component or system in a circuit from damage due to current overload. In this type of circuit breaker, an air core winding is used, which provides significantly better insulation than conventional devices. The APL11-4088-1 circuit breaker is a multi-pole device which can be used in 3-phase or single-phase applications. It is designed to switch on and off at its rated current value, thus providing the necessary protection from damage caused by an overload current.When a circuit breaker senses an overload current, it will trip, which essentially results in a temporary loss of power to the circuit. This is why it is important to select a circuit breaker with the right current ratings for the application. The APL11-4088-1 circuit breaker is designed to handle currents up to 80 Amp in 3-phase applications and up to 40 Amp in single-phase applications.The APL11-4088-1 circuit breaker uses a fault current interruption system to ensure maximum safety and reliability in applications, where overloading or short circuiting could occur. If the current passing through the breaker is more than its rating, the current will be interrupted via the fault current interruption system. The system consists of a current-limiting resistor and a contactor that are used to control the current flow and interrupt the current in the event of an overload.The circuit breaker is also equipped with a thermal magnetic trip (TMT) mechanism, which helps to reduce the chances of failure due to overheating. The TMT allows the circuit breaker to detect the ambient temperature, so that it can adjust the switching frequency accordingly. This not only ensures the protection of the circuit, but also helps to reduce energy consumption.In addition, the APL11-4088-1 circuit breaker is designed to be highly reliable and provides several other operational features, such as LED trip indicators, surge protection, and DIN rail mounting. All of these features make the APL11-4088-1 an ideal option for a variety of commercial and industrial applications where reliable circuit protection is necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description