APTDF100H60G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are integral components in many electronics projects and have become a mainstay in the modern industry. As such, their applications and principles of operation need to be thoroughly understood in order to wisely specify and correctly implement them in electronic systems. An idealized representation of a bridge rectifier is shown in the figure below and is termed a diode bridge. The diode bridge can be used to convert AC (Alternating Current) voltage inputs into a corresponding DC (Direct Current) voltage output.

The APTDF100H60G is an ideal bridge rectifier designed for a variety of applications. It is a 100A high power rectifier with a rugged construction using high volume epoxy and aluminum shield to ensure a reliable and long-lasting product performance. The APTDF100H60G offers fast recovery time, low reverse recovery current, and high surge and peak current capability. The device features low VF (forward voltage drop) at high current, which makes it suitable for many power supply applications including laptop power supplies and more.

The working principle of a bridge rectifier is based on four diodes that are connected in a closed loop manner (hence the name bridge) and the resulting circuit is commonly referred to as full wave rectification. When an AC voltage is applied across the input terminals, at the beginning of a half-cycle, when the peak of the positive half-cycle signal is present at the anode of Diode #1 and the peak of the negative half-cycle signal is present at the anode of Diode #3, both diodes will conduct by allowing the current to flow through them. This current then flows through the load and into the negative terminal, while the current in the other two diodes is blocked. At the end of the half-cycle, when the signals are reversed the diodes will reverse direction.

During the second half-cycle, when the peak of the negative half-cycle signal is present at the anode of Diode #2 and the peak of the positive half-cycle signal is present at the anode of Diode #4, once again both diodes will conduct, allowing the current to flow. This current again flows through the load and into the negative terminal while the other two diodes block the current. At the end of the half-cycle, the signals are again reversed and the diodes will reverse direction.

Due to this action, the bridge rectifier converts the incoming AC voltage into a corresponding DC voltage, with the only difference being that the polarity of the DC output voltage is reversed when compared with the polarity of the input voltage. This is the main working principle of a bridge rectifier.

The primary application of the APTDF100H60G is in power supply rectification, providing the required DC voltage from an AC input power source. This device can also be used in various other applications such as AC–DC Converter, LED drivers, Automotive Chargers and more. The device is widely used in applications where high power, high efficiency, low VF and fast recovery time are required.

The APTDF100H60G rectifier is designed to handle a maximum current of 100A, up to a maximum peak current of 150A. It is capable of operating at temperatures ranging from -40°C to +125°C, and the maximum reverse voltage is 600V DC. It has a high surge current capability and an ultra low VF at high current, which makes it an ideal device for many power supply applications.

In conclusion, the APTDF100H60G is an ideal bridge rectifier designed for a variety of applications. It is a 100A high power rectifier with a rugged construction, fast recovery time, low VF, and high surge and peak current capability. The primary application of the device is in power supply rectification, providing the required DC voltage from an AC input power source.

The specific data is subject to PDF, and the above content is for reference