AQY212FG2SX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays ( SSRs ) are a form of electrical relay that offer the same type of protection as a mechanical relay but without the actual contact between the two sides of the circuit. In SSRs, the switch is solid-state, without the moving parts of a traditional electro-mechanical relay. In this way, they are able to provide a switching solution that is more reliable and faster for a variety of application.

The AQY212FG2SS is a dual-pole, zero-crossing, four-quadrant, solid-state relay, controlled by a TTL or CMOS logic input. It is used to switch AC loads from DC control signals. The AQY212FG2SS is particularly designed to drive high power AC loads from logic-level electronic signals, and to reduce heat, noise, and power dissipation.

The AQY212FG2SS features a dual-pole design, which makes it capable of switching two AC loads independently from a single DC control input. This saves both power and space in the circuit. The dual-pole design also makes it possible to monitor the status of each pole separately, enabling it to perform several types of complex control functions.

Not limited to only AC loads, the relay is also capable of controlling DC loads from DC control signals. This is achieved through its four-quadrant control scheme. In this way, the user can achieve more flexible and reliable control of both AC and DC power loads.

The AQY212FG2SS relay features an SCR output stage which controls the on/off state of the AC and DC power load. The SCR stage is triggered by a opto-isolator which is driven by the logic-level DC control signal. This opto-isolator is a photo-transistor that is activated when a voltage is applied to its input. The resulting change in current induces a change in the SCR gate voltage, controlling the on/off state of the AQY212FG2SS.

The AQY212FG2SS also features a zero-crossing design which reduces the rate of overshoot and eliminates the need for snubbing or other measures to reduce the effects of switching transients. The zero-crossing detection is accomplished through the use of a Low Voltage Detector (LVD) which detects the zero point of the AC voltage and initiates the switching operation. This ensures a smooth transition between ON and OFF states.

The AQY212FG2SS is an ideal solution for a variety of applications, including control of motors, heating elements, room temperature controllers, industrial controllers, process controllers, and more. The limits on current, voltage, and power make it suitable for both AC and DC power loads. It is also suitable for applications that require switching of high-power AC loads in a more reliable and efficient manner.

The specific data is subject to PDF, and the above content is for reference