MCTC2490JEHD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCTC2490JEHD is a solid state relay, or SSR, that is widely used in a variety of industries. This relay is one of many designed and manufactured by MCTC Corporation, a major supplier of SSRs. It is an on-off relay with a rating of up to 24 VDC, and provides relay switching for loads of up to 2.0 A. The device is one of the most reliable and cost effective single-pole relays on the market, and is extensively used in applications that require a high-power on-off relay.The MCTC2490JEHD has two basic components, a voltage controlled thyristor, or VCT, and a control circuit. The VCT is responsible for opening and closing the relay contacts, while the control circuit is responsible for the relay’s on and off operation. The VCT operates by switching a current between two contacts when the voltage across it reaches a certain level, and this in turn switches the relay’s contact open or closed. The control circuit monitors the voltage at both contacts and routes current to the VCT when the voltage differential reaches the established level.This solid state relay has many advantages over its mechanical counterparts. It has a very fast response time, often measured in nanoseconds, and is very durable, with no moving parts that can wear out over time. Additionally, it can handle high inrush currents with no problem, and will not cause any arcing or sparking when it operates. And because it contains no mechanical components, there is no possibility of any mechanical failure or maintenance being required.The MCTC2490JEHD is suitable for a variety of different applications. It is widely used in the automotive industry to control the fuel injector systems on many cars and light trucks. It is also commonly used in industrial machinery, to control the speed of motors and pumps. Additionally, it is used in medical equipment, such as robotic surgery systems, and in HVAC systems as well.To install the MCTC2490JEHD, simply mount it onto a suitable housing or panel using the mounting hardware that is included with the device. Then connect the positive and negative terminals to a 24 VDC power source, and the control terminals to the desired logic circuit. The control terminals can accept a 3 to 32 VDC input signal, and will switch the relay on or off when this signal is present.In conclusion, the MCTC2490JEHD is a reliable and cost effective solid state relay for a variety of different applications. It is very fast and durable, and can easily handle high inrush currents with no problem. Its installation is straightforward, and it requires no maintenance. With its wide range of capabilities, it is sure to be a great addition to many different types of control systems.

The specific data is subject to PDF, and the above content is for reference