Allicdata Part #: | ARD30024-ND |
Manufacturer Part#: |
ARD30024 |
Price: | $ 0.69 |
Product Category: | RF/IF and RFID |
Manufacturer: | Panasonic Electric Works |
Short Description: | ARD COAXIAL SWITCH |
More Detail: | RF Switch IC General Purpose SP6T 13GHz 50 Ohm |
DataSheet: | ARD30024 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.63000 |
Test Frequency: | 8GHz |
Supplier Device Package: | -- |
Package / Case: | Module, Pin Contacts |
Operating Temperature: | -55°C ~ 85°C |
Voltage - Supply: | 24V |
Impedance: | 50 Ohm |
Features: | -- |
IIP3: | -- |
P1dB: | -- |
Series: | -- |
Insertion Loss: | 0.3dB |
Isolation: | 70dB (min) |
Frequency Range: | DC ~ 13GHz |
Circuit: | SP6T |
Topology: | Reflective |
RF Type: | General Purpose |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Switches are used in a wide variety of applications, providing an important link in a communication system. The ARD30024 is an example of an RF Switch that find applications in a varied range of scenarios. This article explains the ARD30024 application field and working principle.
Application Field
The ARD30024 is an RF Switch important for radio frequency (RF) communication. It is a reflective single-pole double-throw (SPDT) switch that features up to 10 watts of input power using a single 5 V DC power supply. The switch has a frequency range from 200 to 2000 MHz and is temperature-compensated over the 0-60 degrees Celsius range.
This RF switch is well-suited for use in a variety of communication networks. This includes networks for broadcast, telecom, and digital networks. Specifically, the ARD30024 can be used for cellular base stations, wireless communication systems, antenna switching, and cable TV applications.
Working Principle
The ARD30024 switch has a simple working principle. It consists of two coils, the tap coil and the oscillator coil. The tap coil is connected to a signal input and the oscillator coil is connected to a power supply. When the power supply is turned on, an alternating current is created in the oscillator coil. This causes an electromagnetic field to be created around the tap coil.
The alternating current in the tap coil induces a voltage in the signal input that is proportional to the current in the oscillator coil. This allows the switch to control the flow of signals between input and output. Connecting a DC-current to the oscillator coil sets the switch to one of its two states: On or Off. When the switch is in the on state, the input signal will be passed to the output port and when the switch is set to the off state, the signal will be blocked.
Conclusion
The ARD30024 is an important RF switch for communication networks. By its simple yet effective working principle, the ARD30024 can be used for switching signals between two or more ports over a wide frequency range. With 10 watts of input power, the switch is suitable for both broadcast networks and more power-demanding applications alike.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ARD30024 | Panasonic El... | 0.69 $ | 1000 | ARD COAXIAL SWITCHRF Swit... |
ARD3204H | Panasonic El... | 0.69 $ | 1000 | ARD COAX 13GHZ FAILSAFE/L... |
ARD3004H | Panasonic El... | 0.69 $ | 1000 | ARD COAX 13GHZ FAILSAFE/L... |
ARD3004HQ | Panasonic El... | 0.69 $ | 1000 | ARD COAX 13GHZ FLSF/LTCH ... |
ARD30012Z | Panasonic El... | 1.39 $ | 1000 | SWITCH COAX SP6T FAIL-SAF... |
ARD30012ZQ | Panasonic El... | 1.39 $ | 1000 | SWITCH COAX SP6T FAIL-SAF... |
IC TRANSFER SWITCH 8GHZ 16-QFNRF Switch ...
RV COAXIAL SWITCHRF Switch IC General Pu...
IC RF SWITCHRF Switch IC
IC SWITCH RF SG-FWLP-18RF Switch IC
IC RF SWITCH SPST 50 OHM 6DFNRF Switch I...
IC RF SWITCHRF Switch IC