ARJM11D7-805-AN-ER4-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ARJM11D7-805-AN-ER4-T application field and working principle

In fields of low-speed multi-signal transmission, ARJM11D7-805-AN-ER4-T, also known as a transformer jack, is a modular connector designed to terminate a variety of cables like coaxial, shielded and unshielded twisted pair (UTP) cables. The connector also provides electro-magnetic isolation, protecting the receiving equipment from being damaged due to poor grounding, or induced noise from high-speed communication cables. It consists of a small plastic or metal housing, which contains the magnetics within its core.

The internal core of the ARJM11D7-805-AN-ER4-T contains a ferrite core that acts as the magnetic part of the connector, and is surrounded by a dielectric sheet. The dielectric sheet serves to insulate the core and prevent any electrical contacts from forming between the core and the pin/socket housings. The core is attached to a pair of pin/socket housings, which contain pins or sockets for the signal cables. The signal cables are inserted into the pin/socket housings, which make contact with the pins and sockets of the core.

When a signal passes through the core, an EMF (electro-magnetic field) is generated, which acts like a shield to the signal. This shield prevents any signal from leaking out of the core, and thus provides isolation between the source and receiving equipment from the interference of other equipment. This isolation also prevents any electrical feedback from the receiving equipment, which could cause errors or other problems.

Once the signal has passed through the core, the EMI (electro-magnetic interference) generated by the core is reduced, and the signal is sent to the desired device. This allows for a cleaner transfer of a signal, with less interference from other devices in the area. Additionally, this reduces power consumption as well as the overall size of the system, since the core and its associated components take up less space than other connectors.

In conclusion, the ARJM11D7-805-AN-ER4-T is a modular connector designed for low-speed signal transmission. It provides the necessary electro-magnetic isolation needed to ensure that signals are not affected by other sources of interference, and provides a clean signal without the need for bulky and expensive components.

The specific data is subject to PDF, and the above content is for reference