ARS34A12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

High frequency (RF) relays provide a method of controlling signals up to 6GHz in many different applications. One such device is the ARS34A12, a solid state relay that is designed for ultra-high frequency applications up to 6 GHz. This relay is designed to provide an on/off control of the RF signal, allowing it to be directed towards the desired output path.

The ARS34A12 is a latching relay that uses a momentary input to switch the RF signal from one port to another. This makes it ideal for switching high frequency signals automatically with an appropriate signal application. It is a single pole, double throw relay with a three-position terminal switch. The relay has an electrical isolator, which helps keep out interference and ionospheric noise, as well as reducing power dissipation.

The relay has three terminals: the source terminal, the load terminal, and the ground terminal. The source terminal is used to connect the input signal, which will be then directed to another port if the relay is in the "on" state. The load terminal is used to connect the output signal to the desired output path. The ground terminal is used to provide a reference voltage for the relay.

The operation of the relay is based on an analysis of the input signal to determine its frequency. This analysis is performed by using a circuit which consists of an amplifier, frequency filter, comparator, and power amplifier. The amplifier is used to amplify the input signal so that it can be analyzed by the frequency filter. The filter will then determine the frequency of the signal, and the comparator will compare it to the specified frequency that the relay is set for. If the signal is within the set frequency range, then the power amplifier will send a signal to the relay activating it.

Once the relay is activated, the RF signal will be directed to the output path on the load terminal. If the signal is outside of the specified frequency range, then the power amplifier will not send a signal, and the relay will remain in the "off" state. The relay will then remain in the "off" state until a signal within the specified frequency range is detected.

The ARS34A12 relay is designed to provide a cost-effective method of controlling high frequency signals up to 6GHz. The addition of the electrical isolator ensures that interference and noise are kept out, and that power dissipation is reduced. The latching feature ensures that the RF signal is directed to the desired output path automatically when a signal within the set frequency range is detected. This makes the ARS34A12 a reliable solution for a variety of high frequency applications.

The specific data is subject to PDF, and the above content is for reference