ARV10N12Q

Test Frequency:	8GHz
Supplier Device Package:	--
Package / Case:	Module, Pin Contacts
Operating Temperature:	-55°C ~ 85°C
Voltage - Supply:	12V
Impedance:	50 Ohm
Features:	--
IIP3:	--
P1dB:	--
Series:	--
Insertion Loss:	0.4dB (max)
Isolation:	60dB (min)
Frequency Range:	DC ~ 8GHz
Circuit:	SPDT
Topology:	Reflective
RF Type:	General Purpose
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ARV10N12Q RF Switches

RF switches are active components commonly used in radio frequency (RF) electronic circuits, primarily for signal switching applications. They can also be used in combination with other active components to form transceivers – devices that can both transmit and receive signals. A well-made RF switch will provide low on-resistance and low insertion loss, minimal signal distortion, and good linearity. The ARV10N12Q is a specially designed RF switch that has been developed to meet these requirements. In this article, we will explain the application field and working principle of the ARV10N12Q RF switch.The ARV10N12Q is a single-pole, double-throw reflectometer RF switch. It is designed to be used in a wide range of test applications, including vector network analysis (VNA), dynamic signal analysis (DSA), signal transmission and reception, etc. In these applications, the ARV10N12Q switch is used to route signals of various frequencies and power levels between different components. It offers low signal loss and high crosstalk performance, making it suitable for use in critical RF circuitry.The ARV10N12Q is a jumpered, diode-controlled reflectometer RF switch. It is composed of three terminals – two inputs and one output. The two input terminals are connected to a pair of series-driven PIN diodes. These diodes are switched on and off via the application of an external control signal. When the diodes are switched on, the signal at the two input terminals is routed to the output terminal. When the diodes are switched off, the signal is prevented from passing through the switch.The ARV10N12Q has an input frequency range of DC to 26 GHz and an insertion loss of typically 0.4 dB at 2 GHz. The switch also has high linearity performance, with a third order intercept point of typically +36 dBm. It can handle a maximum power input of +23 dBm. The switch has a low switching time of typically 30 ns and a control voltage range of 0 to -6 V.The ARV10N12Q is a high-performance RF switch with excellent reliability and low cost. It is an ideal choice for test and RF system applications where signal routing and switching is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description