AS225-313LF RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF switches are widely used in many field, such as wireless communication, base station, radio equipment, etc. They mainly interact with radio signals and are used to lead and modulate the RF signals. The AS225-313LF is a single-pole triple-throw switch (SP3T) RF switch. It is designed for receiver selectivity, antenna switching, as well as allowing route of multiple signals that can be carried into a single output.

The AS225-313LF is composed of PIN diodes and series capacitors, which provides low loss, low insertion loss, high isolation, and reliability. The operating frequency range is from 0.7GHz to 3.3GHz. It can handle up to 10 watts of power. The interface serial communication protocol is SPI or I2C, which can make it easier control by external circuit board. It supports switching time less than 10ms and enables fast switching performance in mobile communication applications.

The structure of the AS225-313LF consists of different single input ports, single control ports, and a single output port. The working principle of the switch depends on the PIN diode. By controlling the forward or reverse bias current of the PIN diode, different paths are created for the signals. Specifically, when the PIN diode is forward biased, the small signal can travel from input 1 to the output port, with the other two input ports being blocked. When bias current is reversed, the small signal travels from input 2 to the output port instead. Hence, through careful adjustment of the bias current, AS225-313LF can be used to switch multiple signals in multiple RF modules.

Therefore, the AS225-313LF is ideal for applications which require high-performance, low-loss RF switching. Due to its high isolation and high power handling capabilities, it can be used for multiple digital and analog applications. It has been successfully applied in switching for high-frequency antennas, test and measurement systems, lab use, space exploration, digital communication systems, military and commercial applications.

In conclusion, the AS225-313LF is an ideal choice for RF switching applications in the range of 0.7GHz to 3.3GHz due to its low insertion loss and high isolation. It can be used in many communication systems and can support up to 10 watts of power. Furthermore, the user-friendly interface serial communication protocol makes it easier to communicate with external equipment.

The specific data is subject to PDF, and the above content is for reference