ASA1-80.000MHZ-L-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is a type of electronic device that creates an output signal using a reference frequency. The ASA1-80.000MHz-L-T3 is a Voltage Controlled Oscillator (VCO) with an output frequency of 80.000MHz. VCOs are used in a variety of applications, from radio transmitters, signal generators, and clock circuits, to frequency shift keying (FSK) modulators and frequency hoppers. The ASA1-80.000MHz-L-T3 also has a wide tuning range and a low phase noise of -130dBc/Hz at 1MHz offset.

The ASA1-80.000MHz-L-T3 has a tuning voltage range of 0.3 to 6.8 volts, with a frequency variation of 80 to 90 MHz as the tuning voltage varies. This makes it suitable for use in frequency synthesis applications. The voltage control input of the oscillator also has very low input current requirements, which allows for easy control of the oscillator through an external controller or computer. As the output frequency is linearly dependent on the control voltage, the frequency of the signal can be easily adjusted to suit the needs of the system.

The oscillator has a high input impedance of 50 Ohms, which prevents loading of the input signal. This is beneficial in applications such as radio transmitters, where the signal to be transmitted must reach the receiver with minimal signal degradation. The low phase noise of the oscillator also ensures that the transmitted signal remains unaffected by any outside interference and provides a low distortion of the signal.

The ASA1-80.000MHz-L-T3 is a reliable and stable oscillator that is ideal for low noise, high stability applications. It is suitable for a variety of applications, ranging from broadcasting and communications, to frequency synthesis and digital tracking systems. Additionally, the low power consumption and small form factor of the oscillator make it an attractive solution for embedded and portable applications.

The specific data is subject to PDF, and the above content is for reference