ASA2-64.000MHZ-L-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces a periodic, oscillating signal, often a sine wave or a square wave. The most common type of oscillator is the Digital Oscillator, which uses digital circuits to create the signal. Oscillators find extensive use in electronics, communications, and computer science. The ASA2-64.000MHZ-L-T3 oscillator is a widely used oscillator of the digital type, and is commonly used in the electronics field.

ASA2-64.000MHZ-L-T3 Application Field

The ASA2-64.000MHZ-L-T3 oscillator is a Sine Wave type of oscillator and is used extensively in the field of electronics. It is typically used in low power applications such as consumer electronics, where its low power consumption and low cost make it a preferred choice. It is also used in static RAM timing applications, and it is commonly found in embedded systems, automotive electronics and other applications where accuracy and precision are required. Its low power consumption also makes it preferable to other oscillators in laptop and tablet computers, where battery life is an important factor.

ASA2-64.000MHZ-L-T3 Working Principle

The ASA2-64.000MHZ-L-T3 oscillator works on the principle of a digital phase locked loop (DPLL). The DPLL combines the use of a voltage controlled oscillator (VCO) and a frequency divider. The VCO is a circuit that generates a specific frequency when fed with certain voltages. The frequency is divided by a counter to produce the required frequency. The DPLL constantly compares the output of the frequency divider with a reference signal and adjusts the frequency accordingly. This keeps the output signal frequency constantly in sync with the reference signal.

The ASA2-64.000MHZ-L-T3 oscillator supports a wide range of frequencies from 32.000MHz up to 64.000MHz. It also features a wide operating temperature range of -40°C to 85°C. The oscillator is also extremely low-power, with a maximum power consumption of only 500mW. The oscillator is also highly accurate, with a built-in tolerance of 1%. It also has a built-in power-down mode, which allows it to enter a low-power consumption state when it is idle.

Conclusion

The ASA2-64.000MHZ-L-T3 oscillator is a widely used oscillator of the digital type, and is commonly used in the field of electronics. It is a sine wave type of oscillator and is used in applications where high accuracy and precision are required, such as static RAM timing applications. It is also used in consumer electronics due to its low power consumption and low cost. The ASA2-64.000MHZ-L-T3 works on the principle of a digital phase locked loop, and supports a wide range of operating frequencies and temperatures.

The specific data is subject to PDF, and the above content is for reference