ASG2-P-X-A-120.000MHZ

Series:	ASG2-P
Packaging:	Cut Strip
Part Status:	Active
Type:	XO (Standard)
Frequency:	120MHz
Function:	Enable/Disable
Output:	LVPECL
Voltage - Supply:	3.3V
Frequency Stability:	±35ppm
Operating Temperature:	-40°C ~ 85°C
Current - Supply (Max):	65mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	6-SMD, No Lead
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Height - Seated (Max):	0.039" (1.00mm)
Current - Supply (Disable) (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of ASG2-P-X-A-120.000MHZ Oscillators

An oscillator is a device that produces an electrical signal by alternating current when it is triggered. The frequency of alternating current created by an oscillator depends on the physical components of the associated circuit. Generally, oscillators are classified based on their frequency range, which covers ultrasonic, radio, microwave, and even optical frequencies. The ASG2-P-X-A-120.000MHZ is one such oscillator, which generates a frequency of 120.000MHz.

Application Field

The ASG2-P-X-A-120.000MHZ Oscillator is primarily used in the field of radiofrequency (RF) and microwave engineering. It is often used in communications systems that require high frequency signals, such as cellular base stations, satellite communication terminals, radar, and navigation systems. It can also be used in radio-frequency equipment such as radios, televisions, walkie-talkies, wireless networks, and other consumer electronics products.

Working Principle

The ASG2-P-X-A-120.000MHZ Oscillator uses a variety of approaches to generate an alternating current of 120.000MHz. These approaches can be broadly classified into three categories: LC oscillators, crystal oscillators, and electromechanical oscillators. Each of these approaches takes advantage of specific components to generate and sustain a specific frequency of oscillation.LC oscillators employ inductors and capacitors in an LC resonance circuit, in which electrical current oscillates between the two components. As the capacitance and inductance of the LC circuit vary, the frequency of oscillations change. Crystal oscillators use a piezoelectric crystal to generate oscillations of very specific frequency. Finally, electromechanical oscillators use a combination of electrical and mechanical components to produce desired frequency oscillations.

Conclusion

The ASG2-P-X-A-120.000MHZ Oscillator is a specialized component used in the RF and microwave industry. It is designed to generate 120.000MHz oscillations and is used in a range of applications, such as communications, navigation, and radar systems. This oscillator employs several approaches to generate the necessary frequency, including LC oscillators, crystal oscillators, and electromechanical oscillators.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description