ASSR-V622-302E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ASSR-V622-302E optoisolator is a popular choice for isolating and protecting the signals and data which are passed between two circuits. It is comprised of a photodiode and a transistor-based optocoupler, so it is capable of providing over 6000V of galvanic isolation between transmitter and receiver.

The function of the optoisolator primarily involves the usage of an LED (light emitting diode) connected to the input (or transistor) side, which is an electric current or signal source, and a photosensitive device, usually a photodiode or phototransistor, which is connected to the output side. When an electric current (or signal) is sent from the input side’s LED, a corresponding amount of light energy is generated which it irradiates onto the output side’s photosensitive receiver.

The ASSR-V622-302E can be used in a variety of applications. It can be used to electrically isolate signals, particularly in the situations where high and low voltage inputs need to be isolated from each other. It can also be applied to suppress electrical noise between circuits, protect circuits from being damaged by keeping hazardous voltages under control, and in AC/DC motor drivers.

The working principle behind the ASSR-V622-302E involves the energization of the LED by the input signal, which generates the light which is then directed at the receiver side. The receiver senses the light energy from the LED and triggers a high voltage portion across its series diode, while at the same time a low voltage portion is directed to the driving circuitry. This is due to the fact that the LED is dedicated to optically couple the output side of the photodiode to the DC input side of the transistor.

Due to its versatility, the ASSR-V622-302E optoisolator is frequently chosen for applications which require the processing and manipulation of signals up to the tens of thousands of volts range. Its high voltage ratings of over 6000V are usually necessary in order to protect the circuits from undue harm.

Finally, the ASSR-V622-302E is also a good choice if users need to isolate and protect both AC and DC signals or voltages up to one kilovolt. Since it is a two-terminal device without resistors, it can be used in applications for which the voltage needs to be precisely controlled.

The specific data is subject to PDF, and the above content is for reference