ASTMHTA-10.000MHZ-ZJ-E-T3

Oscillators are electric devices used to generate regular signals. ASTMHTA-10.000 MHZ-ZJ-E-T3 is an oscillator specifically created to identify an experimental device’s frequencies at 10,000mhz. This oscillator combines the electronic tuning capabilities of an oven-controlled oscillator and the positioning accuracy of a tuning fork. This makes it advantageous over other oscillators allowing it to produce more accurate frequency readings.

Design of ASTMHTA-10.000MHZ-ZJ-E-T3

The ASTMHTA-10.000MHZ-ZJ-E-T3 oscillator uses a quartz oscillator to identify frequencies. Offered in a high-reliability ceramic package, the unit features an output frequency of 10.000 MHz. It also has a 0.5 to 1.5 volt operating range, a low power consumption of 30 mW, and a tuning range of 50 to 500 kHz.

Features and Benefits of ASTMHTA-10.000 MHZ-ZJ-E-T3

The main feature of the ASTMHTA-10.000 MHZ-ZJ-E-T3 oscillator is its ability to measure frequency at 10,000mhz with higher accuracy than other oscillators. It also offers the following advantages:

• High stability over temperature ranges
• Low power consumption
• Tuning range of 50 to 500 kHz
• Small size

Application of ASTMHTA-10.000MHZ-ZJ-E-T3

The ASTMHTA-10.000 MHZ-ZJ-E-T3 oscillator is used in the measurement and control of mechanical and electrical systems. It can be used to test and measure frequency in research and data acquisition systems. The oscillator is typically used to accurately measure frequencies in laboratory and medical equipment such as patient monitors, heart rate monitors, and other medical instruments. Additionally, it is used in communication systems such as radios and Bluetooth devices to control signals.

Working Principle of ASTMHTA-10.000MHZ-ZJ-E-T3

The ASTMHTA-10.000 MHZ-ZJ-E-T3 oscillator is based on the quartz oscillator principle. Quartz crystals are sensitive to electric fields and produce oscillations when exposed to an electric current. The unit converts the electric current into a frequency of 10,000 MHz and transmits it as an output signal. As a result, the output frequency is regulated by the electric field applied to the quartz crystal.

Conclusion

The ASTMHTA-10.000MHZ-ZJ-E-T3 oscillator is an ideal device for accurately identifying and measuring frequencies in laboratory and medical equipment. With its high stability over temperature ranges, small size, low power consumption, and 50 to 500 kHz tuning range, the unit provides accurate readings with minimal effort. Its versatility makes it suitable for a variety of applications in the measurement and control of mechanical and electrical systems.