ASTMHTA-24.576MHZ-ZJ-E

Type:	MEMS (Silicon)
Frequency:	24.576MHz
Function:	Enable/Disable
Output:	LVCMOS
Voltage - Supply:	2.25 V ~ 3.63 V
Frequency Stability:	±20ppm
Operating Temperature:	-55°C ~ 125°C
Current - Supply (Max):	8mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Height - Seated (Max):	0.032" (0.80mm)
Current - Supply (Disable) (Max):	4.5mA
Series:	ASTMHT
Packaging:	Strip
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

An oscillator is a device or system that generates a periodic signal or waveforms of a particular frequency for a specific purpose. One of the oscillators is ASTMHTA-24.576MHZ-ZJ-E. This oscillator produces an output frequency of 24.576 MHz, and its application field and working principle are outlined below.

Application Field

ASTMHTA-24.576MHZ-ZJ-E has a wide range of applications, such as: 1.It can be used as a signal source in radio receivers and transmitters, providing the basic signal for modulation or demodulation. 2.It can be used in timing circuits, such as frequency meters, timers and counters. 3.It can be used to provide the precise time reference for many systems, such as navigation and communication systems. 4.It can be used in servo systems, providing stable clock signals to the servo system. 5.It can be used in the synchronization of multiple oscillators, which ensures the stable operation of the system.

Working Principle

ASTMHTA-24.576MHZ-ZJ-E is a crystal oscillator consisting of an electrical circuit and a quartz crystal. The quartz crystal is an electronic component that vibrates at a precise frequency when connected to an electric circuit. The frequency of the oscillator is determined by the crystal used. The purpose of using quartz crystals in an oscillator is to maintain very accurate and stable frequencies over a wide temperature range. The basic working principle of ASTMHTA-24.576MHZ-ZJ-E can be summarized as follows:1. In the oscillator is a quartz crystal resonator. The quartz crystal has a high frequency stability and its natural frequency is fixed at 24.576MHz2. The quartz crystal is connected to an electrical circuit, which includes amplifiers and filters. 3. The electrical circuit generates an electrical signal that is amplified and sent back to the quartz crystal. 4. This electrical signal causes the quartz crystal to oscillate at the frequency of 24.576 MHz. 5. The oscillating signal is then filtered by the electrical circuit, and the output of the oscillator is a signal of fixed frequency at 24.576 MHz.

Conclusion

In conclusion, ASTMHTA-24.576MHZ-ZJ-E is a type of oscillator commonly used for many applications such as radio receivers and transmitters, timing circuits, servo systems, frequency meters, timers, and counters. Its working principle is based on the use of a quartz crystal resonator to oscillate at the designated frequency. Its output is a signal with a fixed frequency of 24.576 MHz.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description