ASTMHTA-100.000MHZ-XJ-E

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 105°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	100MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OscillatorsOscillators are electronic circuits or devices that produce recurring or periodic electronic signals. Generally, oscillators produce a sinusoidal, square or triangular waveform, but other more complex waveforms are also used. They are widely used in a variety of electronic circuits, including timing, frequency measuring, signal generating and motor controlling devices. The most commonly used oscillators are classified into two categories: crystal oscillators and oscillators without crystals.ASTMHTA-100.000MHZ-XJ-E is one of the oscillators without crystals, and is mainly composed of voltage controlled oscillator (VCO), divider, phase-locked loop (PLL) and voltage regulator. The VCO of the ASTMHTA-100.000MHZ-XJ-E oscillator converts its input signal into an output signal of a selectable frequency. The divider converts the output frequency of the VCO into a frequency whose division multiple or division ratio is a preset value. The PLL part, which is composed of regulate loop and logic control parts, is used to make the output frequency match the value set down by the divider and hold it, making the oscillator having good stability and accuracy. The voltage regulator part supplies the power for different parts of the oscillator.The application field for this oscillator is quite wide. It can be used for radio telecommunication receiver, local oscillator in a TV tuner, frequency synthesizers, signal generator and some other frequency control and measurement applications. It can also be used to meet many kinds of high frequency oscillation circuit device requirements, such as high stability, temperature drift, wide frequency range, high accuracy and other requirements.The working principle of the ASTMHTA-100.000MHZ-XJ-E oscillator is relatively simple. When the power is switched on, the voltage regulator will supply power to different parts of the oscillator. Then the VCO will convert its input signal into an output signal in a selectable frequency. After that, the divider will divide the output frequency of the VCO into a frequency whose division multiple or division ratio is a preset value. Finally, the PLL part will take over to regulate and maintain the output frequency at the preset value and keep the oscillator having good stability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description