ASTMHTA-12.000MHZ-AR-E-T3

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	12MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction Oscillators are electronic components used in electrical circuits to generate a specific frequency or waveform. The ASTMHTA-12.000MHZ-AR-E-T3 is an oscillator that can be used to generate specific frequencies. This article will discuss the application areas and working principles of the ASTMHTA-12.000MHZ-AR-E-T3 oscillator. Applications Areas The ASTMHTA-12.000MHZ-AR-E-T3 oscillator can be used in a variety of applications. It can be used for the timing and control of digital devices, such as microcontrollers, digital signal processors, and computers. It can also be used for frequency transduction, such as audio and video signals. Additionally, the oscillator can be used for frequency control in radio frequency applications, such as radios, televisions, and cellular phones. Design The ASTMHTA-12.000MHZ-AR-E-T3 oscillator is designed to provide precise frequency control. It consists of a resonator (which determines the frequency), an oscillator circuit (which amplifies the signal from the resonator), and a control circuit, which provides adjustable frequency control. The oscillator’s frequency is controlled by varying the voltage of the control circuit. Working Principle The ASTMHTA-12.000MHZ-AR-E-T3 oscillator operates on the principle of resonance. The resonator is a device that is designed to oscillate at a specific frequency. The oscillator circuit amplifies the signal from the resonator, resulting in a signal of the same frequency as the resonator. The frequency output of the oscillator is controlled by varying the voltage of the control circuit. The control circuit is designed so that the frequency output of the oscillator is proportional to the input voltage. Thus, by varying the voltage of the control circuit, the frequency output of the oscillator can be adjusted. Conclusion The ASTMHTA-12.000MHZ-AR-E-T3 oscillator is an oscillator that can be used to generate a precise frequency. Its applications range from digital control, frequency transduction, and radio frequency applications. It operates on the principle of resonance and the frequency output is controlled by varying the voltage of the control circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description