ASTMHTA-100.000MHZ-ZC-E

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-55°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	100MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ASTMHTA-100.000MHZ-ZC-E Oscillators

The ASTMHTA-100.000MHZ-ZC-E oscillator is a component used in a wide range of electronic systems, both for communication and control applications. This oscillator is suitable for use in a variety of applications, such as in medical technology, navigation systems, fibre optics, and other precision instrumentation systems. An oscillator is a form of electronic circuit designed to generate a signal of a given frequency, frequency range, duration and waveform characteristics. An oscillator may be configured as a system, module, or integrated circuit, and may include transistors, capacitors, diodes, and other active and passive components.The ASTMHTA-100.000MHZ-ZC-E oscillator is a leadless ceramic SMD (surface-mount device) that offers excellent performance and superior reliability in high-frequency applications. The oscillator is rated to operate up to 100MHz, with frequencies higher than 200MHz being achievable in some conditions. It is designed to be used in applications requiring precision synchronization or synchronization among several networked components.The ASTMHTA-100.000MHZ-ZC-E oscillator is based on the Pierce topology and utilizes a quartz crystal resonator as its resonating element. The crystal is connected to two switching p-channel metal oxide semiconductor field-effect transistors (MOSFETs) that are driven by a pair of CMOS inverters and a sinusoidal reference signal. The CMOS inverters are configured as an astable multivibrator, which results in a series of positive and negative feedback cycles between them and the crystal. This causes the crystal to vibrate and produce a signal with a frequency that depends on the resonator’s capacitance and inductance, as well as external factors such as temperature and pressure.The ASTMHTA-100.000MHZ-ZC-E oscillator’s high frequency output has a lower jitter rate than other oscillators and can easily achieve 10ns jitter with a stability of 10-12 seconds. Additionally, its high-frequency capabilities allow it to be used for wide-ranging applications, including but not limited to timing and synchronization, data transmission, frequency division, and phase-locked loop (PLL) applications. The oscillator also offers a large selection of output waveforms, including TTL, LVCMOS, ECL, PECL, and LVPECL. Its small footprint and low power consumption further add to its appeal for use in space and high-reliability applications.The ASTMHTA-100.000MHZ-ZC-E oscillator is an ideal choice for a variety of system-level and communication-level applications. Its excellent frequency stability and wide selection of output waveforms make it ideal for applications requiring precision synchronization or timing. Additionally, its small form factor, low power consumption, and high-frequency capabilities make it a desirable choice for use in embedded systems and space-constrained applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description