ASTMHTA-19.200MHZ-ZR-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are circuits whose signal output is cyclically re-generated from a source external to the circuit, or internally from the circuit itself. The ASTMHTA-19.200MHZ-ZR-E-T3 is a type of oscillator, and is often used in a wide range of applications. This article will discuss the various application fields and the working principles associated with this type of oscillator.

Applications

Due to its wide frequency range and high reliability, the ASTMHTA-19.200MHZ-ZR-E-T3 oscillator is often used in military, aerospace and industrial applications. Its robust nature allows it to function reliably in extreme conditions such as high temperature, high humidity and high vibration. In addition to these applications, ASTMHTA-19.200MHZ-ZR-E-T3 is also used in audio applications such as FM radio, and in instrumentation systems where accurate timing is important.

Working Principle

At the most basic level, the ASTMHTA-19.200MHZ-ZR-E-T3 oscillator operates on the principle of frequency multiplication. An input signal is sent to the oscillator, which then uses specialized circuitry to amplify and multiply the frequency of the signal. This multiplied signal is then sent out as an output signal. This output signal will have the same waveform as the input signal, but will be at a higher frequency.

The ASTMHTA-19.200MHZ-ZR-E-T3 oscillator also uses a crystal as its frequency reference. The crystal is designed to vibrate at a specific frequency, and is also sensitive to temperature and mechanical shocks. In order to keep the output frequency constant, the oscillator circuitry must be able to monitor and adjust the resonance frequency of the crystal. This is done through a specialized circuit which "adjusts" the crystal frequency by changing the capacitance of the circuit.

The ASTMHTA-19.200MHZ-ZR-E-T3 oscillator also uses a complex feedback loop in order to stabilize its output frequency. This feedback loop monitors the output of the oscillator and compares it to an internal reference signal. If the output signal is not within a certain range, the loop will adjust the frequency of the input signal in order to keep the output frequency constant.

Overall, the ASTMHTA-19.200MHZ-ZR-E-T3 oscillator offers a reliable and accurate frequency generation solution for a wide range of applications. Its combination of frequency multiplication, crystal frequency adjustments and feedback loops ensures that the output frequency is stable and consistent.

The specific data is subject to PDF, and the above content is for reference