ASTMHTA-32.000MHZ-ZR-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic devices most commonly used in electronic circuits to generate a periodic, oscillating signals. The ASTMHTA-32.000MHZ-ZR-E is an oscillator that operates at 32.000 MHz and is widely used in industrial, automotive and consumer electronic applications. In this article we\'ll discuss the application field and working principle of this oscillator.

Application Field

This oscillator is mainly used in industrial control systems, home appliances, office computers, and high-frequency communication equipment. For example, it can be used in control panels to measure temperature, pressure, or other physical parameters, and also for communication systems for broadcasting or switching signals in clock systems. It is also used in portable media players for playback, such as MP3 players. In addition, it is utilized in automotive systems for on-board monitoring, diagnostics, and control.

Working Principle

The ASTMHTA-32.000MHZ-ZR-E works by converting an alternating current input to a voltage output with a frequency of 32.000MHz. The oscillator produces a sine wave output with a required frequency that depends on the input current. The oscillator uses an inductor and capacitor to create the oscillations. The inductor stores energy, while the capacitor releases and recharges it. The frequency of the output depends on the inductance and capacitance of the coil and capacitor.

The oscillator operates in two main stages. In the first stage, the input AC is converted to a DC signal by a rectifier circuit and stored in the capacitor. In the second stage, the stored energy is used to create a sine wave of the required frequency. The inductor and capacitor act as frequency control elements, which create an oscillatory waveform with a certain frequency determined by their values.

At the third stage, the output signal is stabilized and amplified by an amplifier built into the oscillator. The output can then be used to drive other circuits in the system. The frequency of the output depends on the capacitance and inductance ratio, and can be adjusted by changing the values of these components.

Conclusion

The ASTMHTA-32.000MHZ-ZR-E oscillator is a widely used device for generating sine wave output with a frequency of 32.000MHz. It is used in many different applications in industrial, automotive, and consumer electronics, where precision timing is required. The oscillator operates by converting an AC input into an output with a frequency dependent on the inductance and capacitance of the coil and capacitor. The output is stabilized and amplified by an amplifier and can be used to drive other circuits in the system.

The specific data is subject to PDF, and the above content is for reference