ASTMHTA-80.000MHZ-ZC-E

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-55°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	80MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

ASTMHTA-80.000MHZ-ZC-E is an oscillator with a wide range of applications. It is used to generate signals with precise frequency and stability for radio communications, radar, and navigation systems. This oscillator uses a quartz crystal to ensure high precision and stability over a wide temperature range.

Application field

When used as a local oscillator for communications receivers, the ASTMHTA-80.000MHZ-ZC-E oscillator can be used in military, commercial and SAR equipment, as well as in receivers for radio and navigational systems. The oscillator provides precise, low frequency signals for these devices. It is also used in satellites for communication, navigation and remote sensing.The ASTMHTA-80.000MHZ-ZC-E oscillator is used in medical equipment, such as MRI and CT scanners. In these systems, the oscillator is used to generate close frequency signals for synchronization and steering of the imaging system.The ASTMHTA-80.000MHZ-ZC-E oscillator is also used in consumer and industrial electronics. It is used to generate low frequency signals for a range of applications, including motor control, power conversion and measurement.

Working Principle

The ASTMHTA-80.000MHZ-ZC-E oscillator works by using a quartz crystal to vibrate at the required frequency. The crystal is mounted in a container which is filled with a liquid, such as mineral oil, that dampens the vibration of the crystal. A capacitor is connected to the crystal to ensure the correct frequency is generated. The capacitor is connected to an amplifier which increases the input signal to the required level.The frequency stability of the ASTMHTA-80.000MHZ-ZC-E oscillator is determined by the quality of the quartz crystal and the other components of the oscillator. A higher quality quartz crystal will result in greater accuracy and stability, but this is balanced by the cost. The frequency of the oscillator can be adjusted by varying the voltage applied to the crystal.The ASTMHTA-80.000MHZ-ZC-E oscillator is a reliable and cost-effective solution for the generation of accurate, low frequency signals. The high quality components used in the construction of the oscillator ensure that the device can operate reliably over a wide temperature range. The wide range of applications show the versatility of the oscillator in many industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description