ASTMHTD-100.000MHZ-ZR-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical circuits that use built-in amplifiers to generate a periodic waveform, usually with the help of an inductor or capacitor. An oscillator is used in a variety of applications, from generating radio waves to controlling an alarm circuit. The ASTMHTD-100.000MHZ-ZR-E oscillator is a type of inductive oscillator that is used in many different applications. This article will discuss the application field and working principle of the ASTMHTD-100.000MHZ-ZR-E oscillator.

What is the Application Field for the ASTMHTD-100.000MHZ-ZR-E Oscillator?

The ASTMHTD-100.000MHZ-ZR-E oscillator is a type of resonant oscillator that is capable of generating a wide range of sine wave signals. It is most commonly used in electronic communications applications where higher frequency signals are needed, such as for radio broadcasting, WiFi networks, and cellular phones. It is also used in consumer electronics for timing and clocking purposes. Additionally, it is used in military and aerospace applications for navigation, guidance, synchronization, and detection.

What is the Working Principle of the ASTMHTD-100.000MHZ-ZR-E Oscillator?

The ASTMHTD-100.000MHZ-ZR-E oscillator operates on the principle of inductive coupling, which involves transferring energy from one coil to another. The coil is made up of two separate parts, the primary coil and the secondary coil. When an AC voltage is applied to the primary coil, an EMF is induced in the secondary coil, which in turn passes this EMF onto the next circuit component. This process is repeated, resulting in a continuous signal that oscillates at a certain frequency.

The ASTMHTD-100.000MHZ-ZR-E oscillator is composed of a primary inductor and a secondary inductor. A resistor and a capacitor are also included in the circuit, as they are necessary for providing feedback to the system. The primary inductor is driven by an AC voltage, which creates a magnetic field. This magnetic field passes through the secondary inductor, inductively coupling the two and driving the process of oscillation.

The ASTMHTD-100.000MHZ-ZR-E oscillator also utilizes a bridge network to generate a higher frequency signal. The bridge network utilizes four capacitors and three resistors to form a resonance circuit, which is then connected to the primary inductor. The bridge network is then driven by the AC voltage, which creates an oscillating waveform across the output terminals. This oscillating waveform is also known as a sine wave.

Conclusion

The ASTMHTD-100.000MHZ-ZR-E oscillator is a type of inductive oscillator that is used for many different applications. It is most commonly used in electronic communications applications where higher frequency signals are needed, such as for radio broadcasting, WiFi networks, and cellular phones. The oscillator utilizes a bridge network to generate a higher frequency signal and operates on the principle of inductive coupling, which involves transferring energy from one coil to another. In conclusion, the ASTMHTD-100.000MHZ-ZR-E oscillator is a reliable and effective oscillator for many different applications.

The specific data is subject to PDF, and the above content is for reference