ASTMHTD-48.000MHZ-XJ-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have been pivotal in shaping the electronic industry and their importance has only grown over time. The ASTMHTD-48.000MHZ-XJ-E is one such oscillator that can be used for a variety of applications. This article will focus on the application field and working principle of the ASTMHTD-48.000MHZ-XJ-E.

The applications of ASTMHTD-48.000MHZ-XJ-E are diverse and its features make it suitable for a variety of scenarios. It can be used in telecommunications, navigation, instrumentation, remote sensing, and many other industrial applications. The high frequency and stability of the ASTMHTD-48.000MHZ-XJ-E make it ideal for frequency hopping systems and for frequency hopping radios. Additionally, the oscillator is ideal for computing and storage, and is also used in industrial automation and control.

The ASTMHTD-48.000MHZ-XJ-E oscillator is a voltage-controlled oscillator that is based on a Bessel topology. This oscillator has a maximum oscillation frequency of 48MHz and a minimum frequency of 10kHz. The oscillator has a high output power with up to 200mW power available at the output. The oscillator is also able to provide stability with an aging rate of less than 0.05 ppm. This oscillator has a temperature range of -10°C to +50°C, making it suitable for the most demanding applications.

The working principle of the ASTMHTD-48.000MHZ-XJ-E is simple. The voltage-controlled oscillator (VCO) consists of two stages of circuit blocks which are connected in series. The first stage is composed of an amplifier, resistor, and capacitor network. The amplifier is used to bias the circuit and the resistors and capacitors form an amplifier loop which creates an oscillation. The second stage is composed of a frequency-determining network, which consists of a varactor diode and a varactor capacitor. The varactor diode is used to tune the oscillation frequency and the varactor capacitor is used to set the maximum and minimum frequencies of the oscillator.

The ASTMHTD-48.000MHZ-XJ-E is one of the most versatile oscillators on the market and can be used for a variety of applications. Its features, such as a high frequency and stability, make it ideal for frequency hopping systems and for frequency hopping radios. It is also suitable for computing and storage applications, and for industrial automation and control. With its simple, voltage-controlled design and its two-stage circuit blocks, the ASTMHTD-48.000MHZ-XJ-E is an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference